462271
12
Zoom out
Zoom in
Previous page
1/39
Next page
13
Notes:
Auto channel set function takes place first; it assigns automatically all receivable stations in your area.
Auto clock set function sets the clock automatically by reading the clock setting data from a station transmitting a
PDC signal while auto channel set is being performed.
During auto channel set, the VCR recognizes each station name of the detected stations and stores them in the VCRs
memory, then automatically sets S
HOWVIEW systems assigned Guide Channel number for those stations according to
the broadcast area.
In the area where to TV station transmits a PDC signal, the VCR can perform neither auto clock set nor auto Guide
Channel number set.
For RF connection users: The VCR detects the channels which are not occupied by local stations and selects one
channel automatically for your Video Channel that is located in the middle of more than 5 vacant channels.
If there is a power cut, or if you press STANDBY/ON, POWER or MENU while Auto Set Up is in progress, Auto Set
Up will be interrupted; be sure to turn off the VCR power once and try again from step 1.
Auto clock may not function properly depending on the reception condition.
IMPORTANT
7 In certain reception conditions, station names may not be stored correctly, and auto Guide Channel Number Set may
not work properly. If the Guide Channel numbers are not set properly, when you timer-record a TV programme using
the S
HOWVIEW system, the VCR will record a TV programme of a different station. When programming the timer
using the S
HOWVIEW system, be sure to check whether the channel position on which your VCR receives the
broadcasting station you wish to record is selected. (P.29)
7 Your VCR memorizes all detected stations even if reception of some of them is poor. In these cases picture quality
may be poor. To delete those stations with an unacceptable picture, see page 18.
7 For RF connection users: In certain reception conditions, the Video Channel may not be set correctly and interference
may appear in the TV picture while the VCRs power is on. Set your Video Channel manually. (P.15)
INFORMATION
7 Language for the on-screen display
Language for the on-screen display is automatically set depending on the Country setting you have made in
preparation on page 10 (unless you have selected BELGIUM or SUISSE), as shown below.
SUOMI = SUOMI DANMARK = DANSK NEDERLAND = NEDERLANDS
PORTUGAL = ENGLISH OESTERREICH = DEUTSCH GREECE = ENGLISH
DEUTSCHLAND = DEUTSCH
ESKÁ REPUBLIKA = ENGLISH OTHER WESTERN EUROPE = ENGLISH
POLSKA = ENGLISH ITALIA = ITALIANO OTHER EASTERN EUROPE = ENGLISH
NORGE = NORSK MAGYARORSZÁG = ENGLISH
SVERIGE = SVENSKA ESPAÑA = CASTELLANO
If you want to change the language setting manually, see page 16.
7 Just Clock
Your VCR is equipped with the Just Clock function which provides accurate time keeping through automatic
adjustments at regular intervals, by reading data from a PDC signal. If you want to take advantage of this function,
simply set it to ON, on the Clock Set screen. (P.20)
S
ETTING
U
P
(CONTINUED)
Untitled-2 16/08/2000, 15:3613
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips VR1100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips VR1100 in the language / languages: English as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info