Manual Philips VR110 (page 17 of 39) (English)

54447

Zoom out

Zoom in

1/39

— 18 —

If you want to delete

unwanted channels

You can delete channels manually.

1 Press VCR.

2 Press MENU.

3 Press 5 or ∞ to select “MANUAL

TUNER SET UP” then press

OK/STATUS.

The programmed channel

information list appears.

4 Press 5 or ∞ until the item you want

to delete begins blinking.

5 Press CLEAR to delete.

The item directly beneath the

cancelled one moves up one line.

6 Press MENU to exit from the menu

operations.

If you want to change the

channel positions

You can also replace the channel

position numbers.

1 Press VCR.

2 Press MENU.

3 Press 5 or ∞ to select “MANUAL

TUNER SET UP” then press

OK/STATUS.

4 Press 5 or ∞ until the item you want

to change begins blinking, then press

OK/STATUS.

5 Press 5 or ∞ to move the station to

the new channel position then press

OK/STATUS.

Example: If you moved the station in

position 4 to position 2, the stations

originally in positions 2 and 3 each

move down one space.

6 Press MENU to exit from the menu

operations.

If you want to descramble

programmes when receiving

scrambled broadcasts

When you can receive a scrambled

broadcast, you can descramble the

programme by connecting this VCR to

an external decoder through the VCR’s

AV2 (L-2) IN/DECODER connector .

Complete the connection described on

page 36 and follow the instructions

below;

1 Press VCR.

2 Press MENU to access the main

menu screen.

3 Press 5 or ∞ to select “OUTPUT/

INPUT SET UP”, then press

OK/STATUS.

The output/input set up screen

appears.

ETTING

(CONTINUED)

4 Press 5 or ∞ to select “A/V2

SELECT”.

5 Press 3 to set to “DECODER” then

press 2 to return to the main menu

screen.

6 Press 5 or ∞ to select “MANUAL

TUNER SET UP”, then press

OK/STATUS.

The programmed channel

information list appears.

7 Press 5 or ∞ 23 to select the

channel position broadcasting

scrambled programmes, then press

OK/STATUS twice. The Manual

Channel Set screen appears.

8 Press 3 until “OFF” (Decoder

setting) begins blinking, and set it to

“ON” by pressing 5 or ∞.

9 Press OK/STATUS. The

programmed channel information

list appears.

10 Press MENU to exit menu

operations.

If you want to perform fine-

tuning

Fine-tuning is performed automatically

during Auto Channel Set, but you can

also perform fine-tuning manually.

1 Press VCR.

2 Press MENU.

3 Press 5 or ∞ to select “MANUAL

TUNER SET UP”, then press

OK/STATUS.

4 Press 5∞ 23 until the item you

want to tune begins blinking. Press

OK/STATUS twice. The Manual

Channel Set screen appears.

5 Press 3 until “+/–” begins blinking,

then press 5 or ∞ until the picture is

clearest.

6 Press OK/STATUS. The

programmed channel list appears.

7 Press MENU to exit the menu

operations.

If you want to change station

names

You can also change the station name

manually.

1 Press VCR.

2 Press MENU.

3 Press to select “MANUAL TUNER

SET UP”, then press OK/STATUS.

4 Press 5∞ 23 until the item you

want begins blinking.

5 Press OK/STATUS twice. The

Manual Channel Set screen appears.

6 If you want to change the station

name to the registered one (P.19),

press 3 until the station name (ID)

begins blinking, then press 5 or ∞

until the new station name (ID)

appears.

If you want to change the station

name to another than the

registered one, press 3 until the

first letter of the station name (ID)

begins blinking, then press 5 or ∞ to

cycle through the characters (A–Z,

0–9, –,

, +, _ (space) and stop when

the desired character is indicated,

then press 3 to enter. Enter the

remaining characters the same way

(maximum of 4).

• If you make a mistake, press 2

until the incorrect character begins

blinking. Then enter the correct

character by pressing 5 or ∞.

7 Press OK/STATUS. The

programmed channel list appears.

8 Press MENU to exit menu

operations.

INFORMATION

If you live in Eastern Europe, “TV

SYSTEM” setting appears instead of

“DECODER” setting on the Manual

Channel Set screen. When you can see

the picture but can hear no audio, select

the appropriate TV system (D/K or

B/G). Normally, TV programmes are

broadcasted as follows.

For Eastern Europe : D/K

For Western Europe : B/G

1 Press 3 until the TV system (D/K or

B/G) starts blinking on the Manual

Channel Set screen.

2 Press 5/∞ to select the appropriate

TV the System (D/K or B/G).

ATTENTION

• If the channel positions are changed

or deleted, the Guide Channel

numbers that have been set are reset

or changed. If an attempt is made at

timer programming with the

SHOWVIEW system in this state, the

“GUIDE CHANNEL SET UP”

screen appears. Input the channel

position on which the broadcast for

the SHOWVIEW number is received.

• If the channels are added, set the

Guide Channel number for that

channel (station). (✈ “SHOWVIEW

Set Up” on page 20)

OUTPUT/INPUT SET

\ A/V1 OUTPUT VIDEO

A/V1 INPUT VIDEO

A/V2 SELECT A/V

A/V2 INPUT VIDEO

SELECT : 5∞ CHANGE : 3

[MENU] : EXIT

Untitled-2 16/08/2000, 15:3718

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips VR110 in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips VR110

Philips VR110 User Manual - German - 39 pages

Philips VR110 User Manual - Dutch - 19 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips VR110 Manual

Product: