811255
21
Zoom out
Zoom in
Previous page
1/24
Next page
21EN
6 Troubleshooting
Warning
Risk of electric shock. Never remove the
casing of the product.
To keep the warranty valid, never try to
repair the product yourself.
If you have problems using this product,
check the following points before you
request service. If you still have a problem,
get support at www.philips.com/support.
Main unit
The buttons on the main unit do not
work.
Disconnect form the power supply for a
few minutes, then connect again.
No power
Ensure that the AC cord is properly
connected.
Ensure that there is power at the AC
outlet.
Press button on the remote control or
soundbar to turn the soundbar on.
Sound
No sound from the soundbar speaker.
Connect the audio cable from your
soundbar to your TV or other devices.
However, you do not need a separate
audio connection when:
- the soundbar and TV are connected
through HDMl ARC connection, or
- a device is connected to the HDMI in
connector on your soundbar.
On the remote control, select the
correct audio input.
It would be strongly advised to
ensure that the TV is running its latest
software. Please check the user manual
of your TV for software updating.
It would also be advised that the
soundbar is running its latest software.
You may consult the local or online
Philips Consumer Care for the latest
software version.
Please make sure TV’s audio output
is set to “HDMI sound system” (or
whatever brand-specic equivalent for
this setting may exist).
If audio is not present or distorted,
it would probably help to switch to
a dierent audio output format to
check whether the issue is generic or a
specic incompatibility with a specic
input format is present.
If there’s no audio on any of sources,
please check other source – like
Bluetooth.
Make sure that the soundbar is not
muted.
Reset this product to its factory settings
(see ‘Factory reset‘).
Distorted sound or echo.
If you play audio from TV through
this product, make sure that the TV is
muted.
Audio and video are not synchronized.
Press enter setting menu, select AV
SYNC to synchronize the audio with
the video.
No sound from the wireless subwoofer.
Manually connect the subwoofer to
the main unit.
Increase the volume. Press + (Volume
Up) on the remote control or on the
soundbar.
When using either of the digital input,
if there is no audio:
- Try setting the TV output to PCM or
- Connect directly to your Blu-ray/
other sources.
- Some TVs do not pass through digital
audio.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips TAB7908 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips TAB7908 in the language / languages: English as an attachment in your email.

The manual is 4.28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips TAB7908

Philips TAB7908 User Manual - German - 24 pages

Philips TAB7908 User Manual - Dutch - 24 pages

Philips TAB7908 User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info