61595

Philips SRU9400 Manual

5
Zoom out
Zoom in
Previous page
1/96
Next page
5
ENGLISH
Searching for the IR-code set
If you cannot find the brand of your device and the corresponding set-
up code in the list, you can let the remote control search for the correct
set-up code.
1 Use the
Mode
key to select the device for which you want to find the
set-up code. Make sure this device is switched on.
The
Device indicator
lights up.
2 Press and hold for 3 seconds.
The
Set-up
menu appears.
3 Press in the
Set-up
menu.
The
Search
and
Exit Setup
keys appear.
4 Press and hold the
OK
key.
The remote control starts transmitting Standby/Power off commands
for the selected device.The
Device indicator
blinks each time a new
code is sent.
5 As soon as the device switches off, release the
OK
key. Make sure no
other keys are pressed.
The IR-code set for the selected device has been activated, and the last
accessed page of the device appears on the touch screen.
6
Tr y out
the device specific keys.
If the activated IR-code set is correct, the device specific keys will
function correctly.
If there are keys that do not function properly, repeat instructions
2
to
5
to search for the set-up code again.
Learning Keys
You can let this SRU9400 remote control
learn
keys from your original
remote control, for example, when a function of the original remote control
is not covered by the touch screen keys.
1 Access the
Set-up
menu and press .
Page 1
of the last selected device appears on the
touch screen.
2 Place the SRU9400 remote control and the
original remote control within
2 inches’ or 6
centimeters’
distance from each other.
3 Press the
key
on the
SRU9400
remote control
that will learn a key from the original remote
control.
The
Learn
key remains on.
Tip You can access other keys of the selected
device with the Page 2 key, or you can select a
different device with the Mode key.
4 Press the
key
on the
original
remote control.
A high-pitched beep indicates that the SRU9400 successfully learned the
key. The
Learn
key blinks twice and the
Set-up
menu reappears.
-or-
A low-pitched beep indicates that the SRU9400 did not learn the key.The
Learn
key blinks once and the
Set-up
menu reappears.
5 Repeat steps
1
to
4
for each key that you want the SRU9400 remote
control to learn.
2 inches
6 cm
SRU9400_IFU_EU_v10.qxd 03-08-2006 10:53 Pagina 5
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips SRU9400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips SRU9400 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info