Picture controls
5 Full automatic control: on/off
This full automatic control mode provides a very easy way to get the best out of your
Philips SPC 900NC PC Camera. Or you can choose to have maximum manual control over
the camera settings by switching the full automatic control mode off. Full automatic control
'on' is the preferred setting for normal use.
Techniques active within full automatic control mode are:
–
Automatic exposure control and automatic white balance control, to provide the best video
source signal possible;
–
Automatic frame rate selection for improved camera sensitivity in low light conditions.
6 Frame rate
You can use the scroll open menu to set the frame rate of the video you wish to capture.
E.g. 30 fps means that the PC Camera will capture video of 30 frames per second.
7 Auto exposure & exposure slider
The exposure is the amount of light received by the sensor and is determined by how long
the sensor is exposed to capture a snapshot or video frame.The result depends on the
sensitivity of the sensor.The PC Camera will find the optimal setting if you select the auto
exposure option.You can use the exposure slider if you would like to set the camera
according to your personal preferences.
