228305

Philips shb 1300 Manual

4
Zoom out
Zoom in
Previous page
1/26
Next page
Using your headset
Wearing your Bluetooth headset
Wearing options
The Bluetooth headset can be attached to your garm-
ent with the metal clip or be worn around the neck.
To change from clip on style to necklace style, attach
the neck strap in three steps:
1. Attach the Y-connector (S6) to the earplug cable
close to Bluetooth device.
2. Attach the slider (S5) to the earplug cable beneath
the clip (S4).
3. Fix the slider position by attaching the clip (S4) to
the earplug cable.
You can detach the neck strap from the earplug cable
at any time.
Redialing the last dialed number
Rejecting incoming calls
Adjusting speaker volume
(Available if supported by your mobile phone)
To redial the last dialed number, press and hold the volume down key S3 for 2
seconds. A short low tone will indicate an attempt to redial.
(Available if supported by your mobile phone)
To reject an incoming call, press the multi function button S1 and hold it until you
hear a long beep tone, then release it.
During a call:
Press and release S2 to increase the speaker volume and
Press and release S3 to decrease the speaker volume.
A key tone will indicate any increase or decrease of the volume. A higher pitch
signal tone will alert you when the volume level reaches its maximum or minimum.
●
●
6
7
Answering incoming calls
The HS will ring when a call comes in. Press the multi function button S1 to
answer the call. The green LED will flash fast (once a second) while the call is in
progress.
Transferring calls (Available if supported by your mobile phone)
During your call, calls can be transferred from the Bluetooth phone to the HS
and from the HS to the Bluetooth phone.
To transfer a call from HS to the Bluetooth phone, please follow the operating
instructions of your phone.
To transfer a call from the Bluetooth phone to the HS: press S1 once; the call wil
be transferred to the HS.l
Muting the microphone
To mute the microphone during an active call:
Press the volume control buttons S2 and S3 simultaneously for about a second.
A periodic beep tone will be heard while the mute function is active.
●
To end the mute function:
●Press the volume control buttons S2 and S3 simultaneously. The periodic beep
tone will stop.
Ending calls
Press S1 to end an ongoing call. After the call is disconnected, the green LED
will flash once every three seconds.
Voice dialing (Available if supported by your mobile phone)
1. Make sure the voice dialing function is properly set up in your mobile phone.
2. Press the multi function button S1 on the HS shortly.
3. After hearing the voice dial signal (four tones low to high pitch), say the name
of the person as recorded in your mobile phone. The call will be connected within
a few seconds.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips shb 1300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips shb 1300 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info