811236
21
Zoom out
Zoom in
Previous page
1/25
Next page
Service 21
Problems Solutions
The projector cannot be turned on. Disconnect and reconnect the power cable, and
try to turn the projector on again.
The projector turns itself off. When the projector is running for a long period
of time, the surface becomes hot. Ventilate the
projector properly, with at least 30 cm clearness
around all the sides of the projector.
Check that the power cable is connected correctly.
The projector cannot be turned off. Press and hold longer than 30 seconds.
The projector cannot read the USB stick. The projector does not support the exFAT file
system.
Format the USB stick in FAT format, then use it.
No image from the external HDMI™ device. Check if the HDMI™ input is selected.
Disconnect the HDMI™ cable or switch off the
HDMI™ device.
Wait 3 seconds.
Reconnect the HDMI™ cable or switch on the
HDMI™ device again.
No sound from the external connected
device.
Check the cables to the external device.
Check that the sound is activated on the external
device.
Only the original cables from the device
manufacturer may function.
No sound from external HDMI™ output
device.
On the HDMI™ output device, set the audio
setting to Stereo (PCM).
No sound when you connect your
computer via HDMI™ cable.
Check that the sound is activated on the computer
and set to output to the projector.
The projector does not react to remote
control commands.
Check the batteries of the remote control.
The temperature of the projector’s surface
is warm.
For this projector it is normal to generate
moderate heat during operation.
What to do if the projector does not work
when connecting to a notebook PC?
Check that the HDMI™ cable is plugged in
correctly.
Make sure that the notebook PC has been
switched to projector display.
Black or white dots (Dead Pixels) appear
on the screen.
DMD displays from Texas instrument may
contain a small number of pixels that do not
function normally (“Dead Pixels”). Your display
has been inspected and is in compliance with
manufacturer’s specifications, indicating that any
pixel defects do not affect the operation or use
of your display. Without prejudice to generality
of the foregoing, Dead Pixels not exceeding 7
dots are within factory specification and are not
considered a defect under this warranty.
Concerning dust, it is usually very rare to have
dust inside the optical machine and it should be
on the lens. To clean the lens, use lens-cleaning
paper to gently wipe the lens surface.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips SCN550 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips SCN550 in the language / languages: English as an attachment in your email.

The manual is 3.27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips SCN550

Philips SCN550 User Manual - German - 31 pages

Philips SCN550 User Manual - Dutch - 28 pages

Philips SCN550 User Manual - French - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info