715612
25
Zoom out
Zoom in
Previous page
1/138
Next page
Problem Solution
The breast pump does
not switch on (indicator
lights do not go on).
-
Make sure that the battery is charged (see 'Charging the breast pump')
or connect the breast pump to the the wall socket.
The breast pump is not
charging.
-
Only use the adapter supplied.
-
Make sure that the adapter has been inserted correctly into the wall
socket and that the small plug has been inserted correctly into the
motor unit.
-
The breast pump is too cold or too hot for charging. Let the breast
pump acclimatize to room temperature for 30minutes.
-
If the problem persists, contact the Consumer Care Center via
www.philips.com/support.
Charging of the breast
pump takes very long.
-
Only use the adapter supplied.
-
Make sure that the adapter has been inserted correctly into the wall
socket and that the small plug has been inserted correctly into the
motor unit.
-
The breast pump is too cold or too hot. It is recommended to charge
the breast pump at room temperature.
-
If the problem persists, contact the Consumer Care Center via
www.philips.com/support.
I do not feel any
suction/the suction level
is too low.
-
If possible, try a higher suction level.
-
Check if the silicone diaphragm is assembled correctly (see
'Assembling the breast pump').
-
Check if the white valve is undamaged and assembled correctly (see
'Assembling the breast pump').
-
Check if the other parts of breast pump are intact and assembled
correctly (see 'Assembling the breast pump').
-
Make sure that the pump is positioned correctly on the breast to allow
a seal between breast pump and breast.
-
If you still do not feel any suction, please contact the Consumer Care
Center via www.philips.com/support.
The suction of the breast
pump is too strong.
-
If possible, try a lower suction level. When you express for the first
time, start with the default suction level (level 5 in stimulation mode,
level 11 in expression mode) and increase/decrease the level when
needed. During different expression sessions, different levels may feel
most comfortable for you.
-
Make sure that you only use the breast pump parts provided with this
breast pump.
-
Check if the silicone diaphragm is undamaged (does not have small
cracks, holes etc.).
-
If the problem persists, contact the Consumer Care Center via
www.philips.com/support.
I express little/no milk
when I use my breast
pump.
-
If you do not feel enough suction, please check Troubleshooting item
'I do not feel any suction/the suction level is too low'.
-
If you are using the Philips Avent breast pump for the first time, you
may
need to acquire some practice before you are able to express
any milk. More expressing tips can be found on the Philips Avent
website www.philips.com/avent.
25
English
English
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips SCF398 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips SCF398 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 7,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info