Manual Philips SCF335 (page 8 of 120) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

715613

Zoom out

Zoom in

1/120

- Although the breast pump is compliant with applicable EMC directives,

it may still be susceptible to excessive emissions and/or may interfere

with more sensitive equipment.

- Never use any accessories or parts from other manufacturers or that

Philips AVENT does not specically recommend. If you use such

accessories or parts, your guarantee becomes invalid.

- Clean, rinse and sterilise all pump parts, except the motor unit, the tube

and cap and the adapter before each use.

- Never put the motor unit or the adapter in water or in a steriliser,

as this causes permanent damage to these parts.

- Do not use antibacterial or abrasive cleaning agents when you clean

breast pump parts.

- Do not use the breast pump if the silicone diaphragm appears to be

damaged or broken. See chapter ‘Ordering accessories’ for information

on how to obtain replacement parts.

- Do not continue pumping for more than ve minutes at a time if you

do not succeed in expressing any milk.

- If the pressure generated is uncomfortable or causes pain, switch off the

appliance, break the seal between the breast and the pump body with

your nger and remove the pump from your breast.

Electromagnetic elds (EMF)

This Philips appliance complies with all applicable standards and regulations regarding exposure to

electromagnetic elds.

Preparing for use

The motor unit, the silicone tube and cap and the adapter do not require cleaning and sterilising, as

they do not come into contact with breast milk.

Clean and sterilise all other parts of the breast pump before rst use as described in chapter ‘Cleaning and

sterilising’. Also clean these parts after each subsequent use and sterilise them before each subsequent use.

Assembling the breast pump

Note: Make sure you have cleaned and sterilised the appropriate parts of the breast pump. Wash your

hands thoroughly before you handle the cleaned parts.

Be careful, the cleaned parts may still be hot.

Tip: You may nd it easier to assemble the breast pump while it is wet.

1 Insert the white valve into the pump body from underneath. Push in the valve as far as

possible (Fig. 2).

2 Screwthepumpbodyclockwiseontothebottleuntilitissecurelyxed(Fig.3).

3 Placethesiliconediaphragmintothepumpbodyfromabove.Makesureittssecurely

aroundtherimbypressingdownwithyourngerstoensureaperfectseal(Fig.4).

ENGLISH8

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips SCF335 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips SCF335 Manual

Product: