513261

Philips SCF330 Manual

10
Zoom out
Zoom in
Previous page
1/92
Next page
Feeding your baby expressed breast milk
You can feed your baby with breast milk from Philips AVENT bottles and storage cups:
1 If you use frozen breast milk, let it defrost completely before you heat it.
Note: In case of an emergency, you can defrost the milk in a bowl of hot water.
2 Heat the bottle or storage cup with defrosted or refrigerated breast milk in a bowl of hot
water or in a bottle warmer.
3
Remove the screw ring and sealing disc from the bottle or remove the lid from the storage cup.
4 If you are using a storage cup, screw the adapter ring onto the cup.
5 Screw a sterilised screw ring with sterilised teat onto the bottle or onto the storage cup
with adapter ring.
Do’s
- Always check the temperature of the milk before you feed it to your baby.
- Always discard any breast milk that is left over at the end of a feed.
Don’ts
- Never heat milk in a microwave, as this can cause uneven heating, which can lead to hot
spots in the milk. It may also destroy nutrients in the milk.
- Never immerse a frozen storage cup in boiling water, as this may cause it to crack.
- Never ll a storage cup with boiling water. Let the water cool down for 20 minutes before
you pour it into the storage cup.
Cleaning and sterilising
Clean and sterilise all parts of the breast pump before rst use. Clean all parts after each
subsequent use and sterilise all parts before each subsequent use.
1 Disassemble the breast pump completely. Also remove the white valve.
Be careful when you remove the white valve and when you clean it. If it gets damaged, your
breast pump does not function properly. To remove the white valve, gently pull at the ribbed
tab on the side of the valve.
2 Clean all parts in hot water with some mild washing-up liquid and then rinse them
thoroughly. You can also clean the parts in the dishwasher (on the top rack only).
To clean the valve, rub it gently between your ngers in warm water with some washing-up 
liquid. Do not insert objects into the valve, as this may cause damage.
3 Sterilise all parts in a Philips AVENT steam steriliser or by boiling them for 5 minutes.
Storage
Keep the breast pump out of direct sunlight as prolonged exposure may cause discolouration.
1 Store the breast pump and its accessories in a safe and dry place.
Compatibility
The Philips AVENT manual breast pump is compatible with Philips AVENT bottles in our range.
When you use bottles that feature our two-piece anti-colic system, always insert the ring in the
top of the bottle before you attach it to the breast pump. When you use other Philips AVENT
bottles, use the same type of teat that was supplied with that bottle. For details on how to
assemble the teat and general cleaning instructions, refer to the user manual that came with
your bottle. These details can also be found on our website, www.philips.com/support.
ENGLISH10
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips SCF330 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips SCF330 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info