Manual Philips scf 870 (page 11 of 100) (English, German, Dutch, French)

400873

Zoom out

Zoom in

1/100

After you have put liquids in the jar, never put the jar in the steaming position.

Note: When you blend uids, make sure you do not ll the jar beyond the maximum level indication on

the jar.

Note: Never steam baby food after you have blended it.

1 Put the blade unit on the blade unit holder in the jar (Fig. 5).

2 Cut solid ingredients into small pieces (cubes not bigger than 2-3cm) before you put them in

the jar.

Tip: Do not process a large quantity of solid ingredients at the same time. Process these ingredients in a

series of small batches instead.

3 Put the ingredients in the jar. (Fig. 6)

Note: Do not exceed the top edge of the green blade unit.

4 Put the valve in the lid of the jar (Fig. 7).

Note: Make sure the valve is xed in the lid.

5 Put the sieve in the lid of the jar (‘click’) (Fig. 8).

6 Place the lid on the jar and turn it clockwise to x it. The small projections on the lid have to

slide into the grooves in the jar. Make sure that the large projection of the lid is placed

exactly over the handle of the jar. (Fig. 9)

7 Place the jar upright on the motor unit, i.e. with the lid upwards. Make sure the handle is on

the right-hand side and positioned between the two ridges of the locking area (Fig. 16).

8 Turn the control knob to the blending position. Hold the knob in this position for as long as

you need but for not more than 30 seconds (Fig. 17).

Note: If the ingredients stick to the wall of the jar, switch off the appliance and loosen them with the

spatula or add some liquid. Do not exceed the maximum level indication on the jar.

Note: Make sure that the blended baby food has the right consistency (e.g. no lumps) before you serve it.

Note: If the baby food is still too solid add some uid (e.g. water) until the baby food is soft and smooth.

Do not exceed the maximum level indication on the jar.

Note: Never steam baby food after you have blended it.

Do not let the appliance blend for more than 30 seconds at a time. If you have not nished

blending after 30 seconds, switch off the appliance and wait a few seconds before you continue. If

the motor unit becomes hot, let it cool down for a few minutes before you continue.

Make sure the baby food is at a safe temperature for your baby.

9 When you have nished blending, simply release the control knob. (Fig. 18)

, The knob automatically returns to the off position.

10 Remove the blended food from the jar. If necessary, use a spatula.

Make sure that the baby food is at a safe temperature for your baby.

11 Unplug the appliance.

 11

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips scf 870 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,39 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips scf 870 Manual

Product: