Manual Philips SCD570 (page 24 of 328) (All languages)

666634

Zoom out

Zoom in

1/328

Whathappensduringapowerfailure?

• 

it continues to operate during a power failure.

If there are batteries in the baby unit, it also

continues to operate during a power failure.

Ismybabymonitorsecurefromeavesdropping

andinterference?

• The DECT technology of this baby monitor

guarantees no interference from other



Theoperatingtimeoftheparentunitis

supposedtobeupto18hours.Whyis

theoperatingtimeofmyparentunitshorter?

• When the parent unit has been charged for the



18 hours. The rechargeable batteries only reach

their full capacity after you have charged and

discharged them at least four times.

• The volume of the parent unit may be too high,

which causes the parent unit to consume a lot of

energy. Decrease the volume of the parent unit

• The microphone sensitivity level of the baby

unit may be too high, which causes the parent

unit to consume a lot of energy. Decrease the

microphone sensitivity level in the menu of the

parent unit.

Whydoesittakesometimeforthebattery

status indicator to appear on the display when I

startchargingtheparentunitwhileitisoff?

• This is normal. The parent unit needs a few

seconds to wake up when you connect it to

the mains while it is switched off. When it is



that it is charging and it has to measure the

battery charge level before the battery status

indicator can be displayed.

Whydotherechargeablebatteriesoftheparent

unitrunlowquickly?

• The rechargeable batteries have reached the

end of their life. You have to replace them. To

replace the rechargeable batteries, see chapter

‘Ordering accessories’.

• The volume on the baby unit may be too high,

which causes the baby unit to consume a lot of

energy. Decrease the volume of the baby unit.

• You may have set a maximum temperature

range that is lower than the actual room

temperature or a minimum temperature range

that is higher than the actual room temperature.

The baby unit continues to send data to the

parent unit and therefore uses more power.This

causes the non-rechargeable batteries of the



• Perhaps you switched on the nightlight. If you

want to use the nightlight, we advise you to run

the baby unit on mains power.

Whydoesthechargingtimeoftheparentunit

exceed10hours?

• The parent unit may be switched on during

charging. Switch off the parent unit during

charging.

Thespeciedoperatingrangeofthebaby

monitoris330metres/1000feet.Whydoesmy

babymonitormanageamuchsmallerdistance

thanthat?

• 

open air. Inside your house, the operating range

is limited by the number and type of walls and/

or ceilings in between. Inside the house, the

operating range is up to 50 metres/150 feet.

Whyistheconnectionlosteverynowandthen?

Whyaretheresoundinterruptions?

• The baby unit and the parent unit are probably

close to the outer limits of the operating

range. Try a different location or decrease the

distance between the units. Please note that

it takes about 30 seconds each time before a

connection between the units is established.

• You may have placed the unit next to a

transmitter or other DECT appliance, such as

a DECT telephone or other 1.8GHz/1.9GHz

baby monitor. Move the unit away from the

other appliances until the connection is re-

established.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips SCD570 in the language / languages: All languages as an attachment in your email.

The manual is 28,65 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips SCD570 Manual

Product: