666634

Philips SCD570 Manual

16
Zoom out
Zoom in
Previous page
1/328
Next page
16
7.3.2 Activating Eco Max mode
1 Select ‘Eco Max’ in the menu with the + and -

2 When the display shows ‘Turn On’, press OK
to switch on the Eco Max mode.
3 The warning message ‘!No alert if out of
range, OK?’ appears on the display. Press OK

D
Note:
The warning message scrolls across the display
twice. If you do not press OK, the parent
unit leaves the menu and the Eco Max mode
remains off.
• The Eco Max indication ashes on the
display and the ‘link’ light ashes green slowly.
• When the parent unit receives a DECT
signal from the baby unit because the baby
makes a sound, the ‘link’ light turns solid
green again.
7.3.3 Deactivating Eco Max mode
1 Press the MENU button
2 Use the + and - buttons to select ‘Eco Max’

3 Use the + and - buttons to select ‘Turn Off’

7.4 Nightlight
This option in the parent unit menu allows you to
switch the nightlight on the baby unit on and off.
1 Select ‘Nightlight’ in the menu with the + and

2 Use the + and - buttons to choose ‘Turn On’.
• The nightlight symbol Q appears on the display.
7.3 Eco Max mode
This baby monitor has a built-in Smart Eco mode
that automatically reduces the DECT signal from
the baby unit as the distance between parent unit
and baby unit becomes shorter. By reducing radio
transmission, it helps to save energy.
If you want to save even more energy and to stop
radio transmission, activate the Eco Max mode
in the menu of the parent unit. In this mode, the
DECT signal of the baby unit is switched off. As
soon as the baby makes a sound, the DECT signal
of the baby unit automatically switches on again.
C
Caution:
InEcoMaxmode,theparentunitreceives
feedbackfromthebabyunitwithadelay.When
yourbabymakesasound,thebabyunitrsthas
toreactivateradiotransmissionbeforeitcan
send feedback to the parent unit.
7.3.1 Please note the following:
• Before you select Eco Max mode, make sure
that the parent unit and baby unit are within
operating range, see section ‘Operating range’
in chapter ‘Using the baby monitor’. In Eco
Max mode you do not receive feedback when
the parent unit is out of range of the baby
unit. You can check the link by pressing any
button on the parent unit.
• If there is no radio transmission from the baby
unit to the parent unit in Eco Max mode, the
sound level lights on the parent unit are off.
The sound level lights go on when the baby
unit reactivates radio transmission because
the baby makes a sound above the selected
sensitivity level.
• If you want to operate the baby monitor in
Eco Max mode, make sure that the sensitivity
level is set between 1 and 3. If the sensitivity
level is set to level 4, the baby unit does not
switch off radio transmission in Eco Max
mode.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips SCD570 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips SCD570 in the language / languages: All languages as an attachment in your email.

The manual is 28,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info