Manual Philips scd510 (page 11 of 148) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

368281

Zoom out

Zoom in

1/148

Out of range alert

When the parent unit is out of range of the baby unit, the parent unit beeps from time to time. The

LINK light on the parent unit ashes red.

Note: The LINK light on the parent unit also ashes red when the baby unit is switched off.

Microphone sensitivity

You can set the microphone sensitivity of the baby unit to the desired level with the SENSITIVITY

button on the parent unit. You can only change the microphone sensitivity when a connection

between the baby unit and the parent unit has been established, i.e. when the LINK light on the

parent unit lights up green continuously.

1 Briey press the SENSITIVITY button on the parent unit (Fig. 25).

, The sound level lights light up for approx. 2 seconds to indicate the current sensitivity level.

2 Briey press the volume + and - buttons on the parent unit until the desired microphone

sensitivity level for the baby unit has been reached.

, one light on = minimum sensitivity level

, all lights on = maximum sensitivity level

Note: When the microphone sensitivity of the baby unit is set to a high level, it picks up more sounds and

therefore transmits more often. As a result, the units consume more power.

Reset function

This function allows you to reset the parent unit and the baby unit to the default settings. You can

use this function if problems occur that you cannot solve by following the suggestions in chapter

‘Frequently asked questions’. You have to reset each unit separately.

1 Press the on/off button to switch off the parent unit. Remove the small plug from the parent

unit and the adapter from the wall socket (Fig. 13).

2 Press and hold the volume down (-) button. Put the small appliance plug in the parent unit

and put the adapter in the wall socket (Fig. 26).

3 Wait for the parent unit to complete its automatic restart at its default settings before you

release the volume down (-) button.

4 Proceed in the same way to reset the baby unit.

Default settings

Parent unit

- Loudspeaker volume: 1

- Microphone sensitivity: 5

Baby unit

- Loudspeaker volume: medium

- Nightlight: off

Accessories

Belt clip

If the batteries of the parent unit are sufciently charged, you can take the unit with you inside and

outside the house if you attach the unit to your belt with the belt clip. This allows you to monitor

your baby while you are moving around.

Connecting the belt clip

1 Snap the belt clip onto the parent unit (Fig. 27).

ENGLISH 11

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips scd510 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips scd510 Manual

Product: