Menu options
15
Switching night light on/off
• Select Light on? or Light oFF?, using – and +
(B-10). Confirm by pressing OK (B-7).
Playing lullabies
To play or stop a lullaby:
• Select LullabY , using – and + (B-10).
Confirm with OK (B-7).
• Select PlaY? to replay the last played lullaby or StoP
LullabY? to stop playback. Confirm with OK (B-7).
To select a different lullaby:
• Select LullabY , using – and + (B-10).
Confirm with OK (B-7).
• Select Select neW, using – and + (B-10).
Confirm with OK (B-7).
• Select the desired lullaby, using – and + (B-10).
Confirm with OK (B-7).
Adjusting microphone sensitivity
You can set the sound sensitivity of the baby unit to the desired
level.When set to the maximum sensitivity level all sounds
(including your baby’s breathing, when loud enough) can be
heard on the parent unit.You can only change the microphone
sensitivity if the connection between the baby unit and the
parent unit is established (when LINK lights (A-3, B-3) light
continuously green).
• Select SenSitiVitY , using – and + (B-10).
Confirm with OK (B-7).
• Select the desired sensitivity level for the baby unit
microphone, using – and + (B-10). Confirm with OK (B-7).
> Sensitivity 9 = minimum level / lowest sensitivity;
Sensitivity 9 9 9 9 9 =
maximum level / highest sensitivity.
Note:When the sensitivity level of the baby unit is set to a high
level, the unit will consume power because it is in
continuous transmission mode.
EN
