Manual Philips scd480 00 (page 12 of 120) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

368396

Zoom out

Zoom in

1/120

Question Answer

Why does the link

light ash red?

It ashes red because there is no connection. The parent unit may be out

of range of the baby unit or may be set to a different channel than the

baby unit. Check if the parent unit and the baby unit are both set to the

same channel. If they are, put the parent unit in a different place, closer

to the baby unit.

Why does the parent

unit beep?

What you hear is the link alarm. It indicates that there is no link between

the baby and the parent units. The parent unit may be out of range of

the baby unit or may be set to a different channel than the baby unit.

Check if the parent unit and the baby unit are both set to the same

channel. If they are, put the parent unit in a different place, closer to the

baby unit.

Why does the parent

unit react too slowly

to the baby’s sounds?

Set the microphone sensitivity on the baby unit to a higher level and/or

move the baby unit closer to the baby. Make sure the baby unit is at least

1 metre/3 feet away from the baby.

Why does the parent

unit react too quickly

to other sounds?

Set the microphone sensitivity on the baby unit to a lower level and/or

move the baby unit closer to the baby.

Why is the

connection lost every

now and then?

The parent unit is probably close to the boundaries of the operating

range. Put the parent unit closer to the baby unit in a place where it has

better reception. Please note that it takes about 30 seconds before the

connection is re-established when you move one or both of the units.

Why do I get

interference on the

parent unit?

You may get interference when the parent unit is out of range of the

baby unit. The parent unit may also be too close to a window and pick

up interfering signals through this window. Move the parent unit away

from the window.

Interference also occurs if there are too many walls or ceilings between

the parent unit and the baby unit. Put the parent unit in a different place,

closer to the baby unit. Also make sure the units are well away from

mobile or cordless phones, radios or TVs.

Why does the parent

unit pick up signals

from another baby

monitor?

The baby monitor operates on the same channel as another baby

monitor in the neighbourhood. Set both units to a different channel with

the channel selector.

Why doesn’t the baby

monitor manage the

specied range of

200m?

The specied range of 200 metres is only valid in open air. Inside the

house the range is limited by the number and type of walls and/or

ceilings between the two units. Change the position of one or both units

to optimise the range.

What happens when

there is a mains

failure?

If you are using the units from the mains without having put batteries in

them, the connection will be lost when there is a mains failure. If there

are batteries in both units, they will automatically switch to battery

power in case of a mains failure and the connection will not be lost.

ENGLISH12

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips scd480 00 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips scd480 00 Manual

Product: