Manual Philips SCD221 (page 8 of 120) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

752198

Zoom out

Zoom in

1/120

Caution

-The breast pump is only intended for repeated use by a single user.

-Never drop or insert any foreign object into any opening.

-Never use any accessories or parts from other manufacturers or that Philips Avent does not

specically recommend.

-Wash, rinse and disinfect all pump parts before each use.

-Do not use antibacterial or abrasive cleaning agents when you clean breast pump parts.

-Do not continue pumping for more than ve minutes at a time if you do not succeed in

expressing any milk.

-If the pressure generated is uncomfortable or causes pain, break the seal between the breast and

the pump body with your nger and remove the pump from your breast.

Preparing for use

Clean and disinfect all parts of the breast pump before rst use in the correct way (see 'Cleaning

and disinfection'). Clean all parts after each subsequent use and disinfect all parts before each

subsequent use.

Assembling the breast pump

Note: Make sure you have cleaned and disinfected all parts of the breast pump. Wash your hands

thoroughly before you handle cleaned parts.

Warning: Be careful, the cleaned parts may still be hot. Only start assembling the

breast pump when cleaned parts have cooled down.

Tip: You may nd it easier to assemble the breast pump while it is wet.

1 Insert the white valve into the pump body from underneath. Push the valve in as far as possible

(Fig. 2).

2 Screw the pump body clockwise onto the bottle (Fig. 3) or storage cup (Fig. 4) until it is securely

xed.

Note: If you use a storage cup, you have to screw the adapter ring onto the storage cup rst (Fig. 4).

3 Insert the silicone diaphragm into the pump body from above. Make sure it ts securely around

the rim by pressing down with your ngers to ensure a perfect seal (Fig. 5).

4 Attach the handle onto the diaphragm with stem by hooking the hole in the handle over the end

of the stem. Push down the handle onto the pump body until it clicks into place (Fig. 6).

5 Place the massage cushion into the funnel-shaped section of the pump body (Fig. 7). Push in the

inner part of the massage cushion as far as possible and make sure that it is perfectly sealed all

around the rim of the pump body (Fig. 8). Press in between the petals to remove any trapped air

(Fig. 9).

Note: Place the cover over the massage cushion to keep the breast pump clean while you

prepare for expressing.

Warning: Always use the breast pump with a massage cushion.

8English

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips SCD221 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips SCD221 Manual

Product: