368305

Philips scd 470 Manual

8
Zoom out
Zoom in
Previous page
1/96
Next page

1 Put the appliance plug in the parent unit and put the adapter into a wall socket.
The power-on light goes on.

The parent unit runs on four 1.5V R6 AA batteries (not included). We strongly advise you to use
Philips LR6 PowerLife batteries.
Do not use rechargeable batteries, as the parent unit does not have a charging function.
Unplug the parent unit and make sure your hands and the unit are dry when you insert the non-
rechargeable batteries.
1 Press down the latch of the battery compartment lid and remove it (Fig. 4).
2 Insert four non-rechargeable batteries.
Note: Make sure the + and - poles point in the right direction.
3 Replace the lid on the battery compartment (Fig. 5).
Note: If the batteries are completely empty, the parent unit automatically switches off and loses contact
with the baby unit.

1 Set the on/off switch of both the baby unit and the parent unit to ‘on’ (Fig. 6).
2 Turn the volume control to switch on the parent unit and to set the volume to the level you
prefer. (Fig. 7)
3 Place the baby unit at least 1 metre/3 feet away from your baby.
4 Place the parent unit within the operating range of the baby unit. Make sure it is at least 1
metre/3 feet away from the baby unit. For more information on the operating range, see
section ‘Operating range’ below.
5 Set the baby unit and the parent unit to the same channel.
It takes 10 to 30 seconds before a connection is established.
, The transmission frequency of channel A is 40.695 MHz.
, The transmission frequency of channel B is 40.675 MHz.
6 The baby unit and parent unit are now connected.

The operating range of the baby monitor is 150 metres/450 feet in open air. Depending on the
surroundings and other disturbing factors, this range may be smaller.
Dry materials Material thickness Loss of range
Wood, plaster, cardboard, glass
(without metal, wires or lead)
< 30cm/12in 0-10%
Brick, plywood < 30cm/12in 5-35%
Reinforced concrete < 30cm/12in 30-100%
Metal grids, bars < 1cm/0.4in 90-100%
Metal or aluminium sheets < 1cm/0.4in 90-100%
8
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips scd 470 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips scd 470 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info