666541
17
Zoom out
Zoom in
Previous page
1/114
Next page
Lumea
SC1997, SC1999
3
Skin tone table / Huidtinttabel /
Tableau de teint de peau / Hauttontabelle /
Tabella del tono della pelle
Hair color table / Haarkleurtabel /
Tableau de couleur de cheveux /
Haarfarbentabelle / Tabella colori di peli
SC2009-SC2007_TabellenPagina_4222.100.4217.3 20/10/16 16:23
2
English 6
Deutsch 26
Français 47
Italiano 69
Nederlands 91
English
Welcome
Welcome to the beauty world of Lumea! You are only a few weeks away
from silky-smooth skin.
Philips Lumea uses Intense Pulsed Light (IPL) technology, known as one of
the most effective methods to continuously prevent hair regrowth. In close
cooperation with licensed dermatologists we adapted this light-based
technology, originally used in professional beauty salons, for easy and
effective use in the safety of your home. Philips Lumea is gentle and offers
convenient and effective treatment at a light intensity that you find
comfortable. Unwanted hairs are finally a thing of the past. Enjoy the feeling
of being hair-free and look and feel amazing every day.
To fully benefit from the support that Philips offers, register your product at
www.philips.com/welcome. For further information, please go to
www.philips.com/lumea to find our experts' advice, tutorial videos and
FAQs and make the most of your Lumea.
Device overview (Fig. 1)
1 Light exit window with integrated UV filter
2 Attachments
a Body attachment
b Facial attachment
c Bikini attachment (SC1999)
3 Reflector inside the attachment
4 Integrated safety system
5 Skin tone sensor
6 Electronic contacts
7 Flash button
8 Opening for electronic contacts
9 On/off button
10 Intensity lights (1-5)
11 'Ready to flash' light
12 Air vents
13 Device socket
14 Adapter
15 Small plug
16 Pouch (not shown)
Who should not use Lumea? Contraindication
General conditions
-
Never use the device if you have skin type V or VI (You rarely to
never sunburn, very dark tanning). In this case you run a high risk
of developing skin reactions, such as hyperpigmentation and
hypopigmentation, strong redness or burns.
6
English
Note: To check if your skin type allows usage of the device, consult
the skin tone table with number 2 on the foldout page.
-
Never use the device if you are pregnant or breastfeeding as the
device was not tested on pregnant or breastfeeding women.
-
Never use the device if you have any active implants such as a
pacemaker, neurostimulator, insulin pump etc.
Medications/History
Never use the device if you take any of the medications listed below:
-
If your skin is currently being treated with or has recently been
treated in the past week with Alpha-Hydroxy Acids (AHAs), Beta-
Hydroxy Acids (BHAs), topical isotretinoin and azelaic acid.
-
If you have taken any form of isotretinoin Accutane or Roaccutane
in the last six months. This treatment can make skin more
susceptible to tears, wounds and irritations.
-
If you are taking photosensitizing agents or medications, check the
package insert of your medicine and never use the device if it is
stated that it can cause photo-allergic reactions, photo-toxic
reactions or if you have to avoid sun when taking this medicine.
-
If you take anticoagulation medications, including heavy use of
aspirin, in a manner which does not allow for a minimum 1-week
washout period prior to each treatment.
Never use the device:
-
If you have received radiation therapy or chemotherapy within the
past 3 months.
-
If you are on painkillers which reduce the skin's sensitivity to heat.
-
If you take immunosuppressive medications.
-
If you have had surgery in the areas to be treated in the last 3
weeks.
7
English
Pathologies/Disorders
Never use the device:
-
If you have diabetes or other systemic or metabolic diseases.
-
If you have congestive heart disease.
-
If you have a disease related to photosensitivity, such as
polymorphic light eruption (PMLE), solar urticaria, porphyria etc.
-
If you have a history of collagen disorder, including a history of
keloid scar formation or a history of poor wound healing.
-
If you have epilepsy with flashlight sensitivity.
-
If your skin is sensitive to light and easily develops a rash or an
allergic reaction.
-
If you have a skin disease such as active skin cancer, you have a
history of skin cancer or any other localized cancer in the areas to
be treated.
-
If you have a history of vascular disorder, such as the presence of
varicose veins or vascular ectasia in the areas to be treated.
-
If you have any bleeding disorder.
-
If you have a history of immunosuppressive disease (including HIV
infection or AIDS).
Skin condition
Never use the device:
-
If you have infections, eczema, burns, inflammation of hair follicles,
open lacerations, abrasions, herpes simplex (cold sores), wounds
or lesions and haematomas in the areas to be treated.
-
On irritated (red or cut), sunburned, recently tanned or fake-
tanned skin.
-
On the following areas without consulting your doctor first: moles,
freckles, large veins, darker pigmented areas, scars and skin
anomalies. This can result in a burn and a change in skin color,
which makes it potentially harder to identify skin-related diseases.
-
On following areas: warts, tattoos or permanent make-up.
8
English
Location/areas
Never use the device on the following areas:
-
Around the eyes and on or near the eyebrows.
-
On the lips, nipples, areolas, labia minora, vagina, anus and the
inside of the nostrils and ears.
-
Men must not use the device on the face and neck including all
beard-growing areas, nor on the whole genital area.
-
On areas where you use long-lasting deodorants. This can result in
skin reactions.
-
Over or near anything artificial like silicone implants, subcutaneous
injection ports (for instance an insulin dispenser) or piercings.
Note: This list is not exhaustive. If you are not sure whether you can
use the device, we advise you to consult your doctor.
Important
Danger
-
Keep the device and the adapter dry.
-
If the device is broken, do not touch any inner part to avoid electric
shock.
-
Water and electricity are a dangerous combination. Do not use this
appliance in wet surroundings (e.g. near a filled bath, a running
shower or a filled swimming pool).
9
English
Warning
-
This device is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, unless they
have been given supervision or instruction concerning use of the
device by a person responsible for their safety.
-
Children should be supervised to ensure that they do not play with
the device.
-
The device is not intended for children under the age of 15 years.
Teenagers aged between 15 and 18 years can use the device with
the consent and/or assistance of their parents or the persons who
have parental authority over them. Adults of 18 years and older
can use the device freely.
-
Always check the device before you use it. Do not use the device
or adapter if it is damaged.
-
Do not use the device if the UV filter of the light exit window is
broken.
-
Do not modify or cut off any part of the adapter or the cord, as this
causes a hazardous situation.
-
Do not use any pencil or pen to mark the areas to be treated. This
may cause burns on your skin.
-
Hair removal by intense pulsed light sources can cause increased
hair growth in some individuals. Based upon currently available
data, the highest risk groups for this response are females of
Mediterranean, Middle Eastern and South Asian heritage treated
on the face and neck.
-
The light exit window can become very hot after use. Do not touch
the inner part of the light exit window before it has cooled down.
-
For the purpose of recharging the battery, only use the detachable
supply unit (A00440) provided with this appliance (see symbol).
10
English
Note: If you notice a skin tone has changed since the last treatment
(e.g. due to tanning), we recommend that you perform a skin test
and to wait 30 minutes before your next treatment.
To prevent damage
-
Make sure that nothing obstructs the airflow through the
ventilation slots of the device.
-
Never subject the device to heavy shocks and do not shake or
drop it.
-
If you take the device from a very cold environment to a very warm
environment or vice versa, wait approximately 3 hours before you
use it.
-
Store the device in a dust free and dry place.
-
Do not expose the device to temperatures lower than 5°C or higher
than 35°C during use.
-
To prevent damage, do not expose the device to direct sunlight or
UV light for several hours.
Caution
-
This device is only intended for removing unwanted body hair
from areas below the cheekbone. Do not use it for any other
purpose. Doing so may expose you to a hazardous situation.
Men most not use it on the face and neck including all beard-
growing areas and the whole genital area.
11
English
-
This device is not washable. Never immerse the device in water
and do not rinse it under the tap.
-
For hygienic reasons, the device should only be used by one
person.
-
Use the device only at settings suitable for your skin type. Use at
higher settings than those recommended can increase the risk of
skin reactions and side effects.
-
Never use compressed air, scouring pads, abrasive cleaning agents
or aggressive liquids such as petrol or acetone to clean the device.
-
The scattered light produced by the device is harmless to your
eyes. Do not look at the flash while using the device. It is not
necessary to wear goggles during use. Use the device in a well-lit
room so that the light is less glaring to your eyes.
-
Always return the device to a service center authorized by Philips
for examination or repair. Repair by unqualified people could
cause an extremely hazardous situation for the user.
-
Never leave the device unattended when it is switched on. Always
switch off the device after use.
-
Do not use the device if any of the conditions mentioned in
chapter ‘Who should not use Lumea? Contraindication' apply to
you.
-
Tanning with natural or artificial sunlight might influence the
sensitivity and color of your skin. Perform a skin test to determine
the appropriate light intensity setting.
-
Before you use Lumea, you should clean your skin and make sure
it is hair-free, entirely dry and free from oily substances.
-
Do not treat the same skin area more than once during a session.
This does not improve the effectiveness of the treatment, but
increases the risk of skin reactions.
-
Lumea should never be painful. If you experience discomfort,
reduce the light intensity setting.
12
English
Electromagnetic fields (EMF)
This Philips device complies with all applicable standards and regulations
regarding exposure to electromagnetic fields.
How IPL works
With IPL technology, gentle pulses of light are applied to the skin and
absorbed by the hair root. The darker the hair, the better the pulses of light
are absorbed.
The pulses of light stimulate the hair follicle to go into a resting phase. As a
consequence, the hair sheds naturally and hair regrowth is prevented,
leaving your skin continuously silky-smooth.
The cycle of hair growth consists of different phases. IPL technology is only
effective when the hair is in its growing phase. Not all hairs are in the
growing phase at the same time. This is why we recommend an 8-week
treatment schedule followed by touch-ups to make sure all hairs are
effectively treated in the growing phase.
Note: Treatment with Lumea is not effective if you have blond or light blond
hairs, as light hairs do not absorb enough light. Below you can see the hair
colors for which Lumea is suitable and effective.
Suitable body hair colors
Note: To check if your body hair color allows usage of the device, consult
the hair color table with number 3 on the foldout page.
13
English
What to expect
Immediately after the 1st treatment
After the first treatment, it can take 1 to 2 weeks for the hairs to fall out. In the
first weeks following the initial treatments, you still see some hairs
growing. These are likely to be hairs that were not in their growing phase
during the first treatments.
After 2-3 treatments
After 2-3 treatments, you should see a noticeable reduction in hair growth.
However, to effectively treat all hairs, it is important to keep on treating
according to the recommended treatment schedule.
After 4-5 treatments
After 4-5 treatments, you should see a significant reduction of hair growth in
the areas that you treated with Lumea. A reduction of hair density should be
visible as well. Keep on treating with frequent touch-ups (every 4-8
weeks) to maintain the result.
Tanning advice
Tanning with natural or artificial sunlight
Intentionally exposing your skin to natural or artificial sunlight with the aim
of developing a tan influences the sensitivity and color of your skin.
Therefore the following is important:
-
After each treatment, wait at least 48 hours before tanning. Even after 48
hours, make sure that the treated skin does not show any redness from
the treatment anymore.
-
In case of exposing your skin to the sun (without tanning intentionally) in
the 48 hours after treatment, use a sunblock SPF 50+ on the treated
areas. After this period, you can use a sunblock SPF 30+ for two weeks.
-
After tanning, wait at least 2 weeks before you use Lumea. Perform a skin
test to determine the appropriate light intensity setting.
-
Do not use Lumea on sunburned body areas.
Note: Occasional and indirect sun exposure does not qualify as tanning.
Tanning with creams
If you have used an artificial tanning lotion, wait until the artificial tan has
disappeared completely before you use the device.
14
English
Before you use your Lumea
Pretreating your skin
Before you use Lumea, you should pretreat your skin by removing hairs on
the surface of your skin. This allows the light to be absorbed by the hair
parts below the skin surface to ensure effective treatment. You can either
shave, short-trim, epilate or wax. Do not use depilatory creams, as
chemicals may cause skin reactions.
If you chose to wax, please wait 24 hours before using Lumea to let your
skin rest. We recommend that you take a shower before the treatment to
ensure that all possible residue of wax has been removed from your skin.
1 Pretreat the areas you intend to treat with Lumea.
2 Clean your skin and make sure it is hair-free, entirely dry and free from
oily substances.
Note: Once the hairs stop growing back, which usually happens after 4-5
treatments, you no longer have to pretreat your skin before you use the
device.
Skin test
When you use Lumea for the first time or after recent tanning, perform a skin
test on each area to be treated. The skin test is necessary to check your
skin's reaction to the treatment and to determine the correct light intensity
setting for each body area.
1 Choose an area close to the area you intend to treat.
2 Switch on the device. Make sure you select setting 1.
3 Put the device against your skin and press the flash button to release a
flash.
4 Slide the device over the skin to the next area to be treated.
5 Increase the setting by one level, apply a flash and slide the device to the
next area. Repeat this for all levels within the recommended range for
your skin type.
6 After the skin test, wait 24 hours and check your skin for any reaction. If
your skin shows reactions, choose the highest setting that did not result
in any skin reaction for subsequent use. The skin test should be
performed in all the areas you want to treat.
Using your Philips Lumea
Skin tone sensor
For extra safety the integrated skin tone sensor measures the skin tone at
the beginning of each session and occasionally during the session. If it
detects a skin tone that is too dark for treatment with Lumea, the device
15
English
automatically disables to prevent you from developing skin reactions. This
means that it does not emit pulses when you press the flash button.
Attachments
Placing and removing
To place the attachment, simply snap it onto the light exit window.
To remove the attachment, pull it off the light exit window.
Body attachment
You can use the body attachment to treat unwanted hair on several body
areas below the neckline. You can use it for example for fast treatment of
larger areas like legs.
Facial attachment
The facial attachment includes an additional integrated light filter for extra
safety and you can therefore use it to treat unwanted facial hair on the
upper lip, chin and sideburns.
Caution:
-
Do not treat your eyebrows with Lumea.
-
When you treat the area above your upper lip, be careful that you do not
flash on the lip.
Bikini attachment (SC1999)
The bikini area attachment has a special filter for treating the coarser hair in
the bikini area.
Selecting the right light intensity
Lumea provides 5 different light intensities. Depending on your skin type
and the
light intensity level you find comfortable, you can select the right
light intensity setting.
1 Consult the table below to select the right setting.
16
English
2 To adjust the light intensity setting, press the on/off button one or more
times until you have reached the required setting. The corresponding
intensity light lights up white.
Note: The device automatically disables when your skin tone is too dark,
to prevent you from developing skin reactions. The integrated skin tone
sensor does not tell you which light intensity setting to use, as Philips
Lumea gives you the freedom to select the light intensity that you find
most convenient.
3 Lumea should never be painful. If you experience discomfort, reduce the
light intensity setting.
4 After recent tanning, perform a skin test to determine the right light
intensity setting.
Skin type
Skin tone Light intensity setting
I White; You always sunburn,
never tan.
4/5
II Beige; You easily sunburn, tan
minimally.
4/5
III Light brown; You sunburn easily,
tan slowly to light brown.
4/5
IV Mid brown; You rarely sunburn,
tan easily.
3/4
V Dark brown; You rarely sunburn,
tan very easily.
You cannot use the device
VI Brownish black or darker; You
rarely or never sunburn, very
dark tanning.
You cannot use the device
Note: To check if your skin type allows usage of the device, consult the skin
tone table with number 2 on the foldout page.
Note: Your skin may react differently on different days/occasions for a
number of reasons.
Handling the device
1 Before use, clean the attachments and the light exit window.
2 Put the small plug in the device and put the adapter in the wall socket.
3 Switch on the device and select the right light intensity for your skin tone.
17
English
4 Place the device at a 90° angle on the skin so that the attachment and
the integrated safety system are in contact with your skin
The integrated safety system prevents unintentional flashing without skin
contact.
5 Press the device firmly onto your skin to ensure proper skin contact. The
device then automatically performs a skin tone analysis and the ‘ready to
flash light’ lights up white to indicate that you can proceed with the
treatment.
Note: When the ‘ready to flash’ light lights up orange, your skin is not
suitable for treatment. In this case, the device automatically disables. You
can try to use the device on other areas with a lighter skin tone.
TIP: If you use Lumea on your bikini area and want to leave some hair in
place, make sure that the skin tone sensor is not placed on the remaining
hair during the treatment, as this can cause the device to block.
6 Press the flash button to release a flash. You should feel a warm
sensation because of the flash.
Note: The light produced by the device is harmless to your eyes. It is not
necessary to wear goggles during use. Use the device in a well-lit
room so that the light is less glaring to your eyes.
7 Place the device on the next area to be treated. After each flash, it takes
up to 3.5 seconds until the device is ready to flash again. You can release
a flash when the 'ready to flash' light lights up again.
8 To make sure that you have treated all areas, release the flashes close to
each other. Effective light only comes out of the light exit window,
therefore there should be some overlap. However, make sure you flash
the same area only once. Flashing the same area twice doesn't improve
the effectiveness of the treatment, but increases the risk of skin reactions.
9 When you have finished the treatment, press and hold the on/off button
for 2 seconds to switch off the device.
Two treatment modes: Stamp & Flash and Slide & Flash
Your Philips Lumea has two treatment modes for more convenient use on
different body areas:
-
The Stamp & Flash mode is ideal to treat small or curvy areas like knees
and underarms. Simply press and release the flash button to release a
single flash.
-
The Slide & Flash mode offers convenient use on larger areas like legs.
Keep the flash button pressed while you slide the device over your
skin to release several flashes in a row.
18
English
Recommended treatment schedule
Initial phase
For the first 4 to 5 treatments, we advise you to use Philips Lumea once
every two weeks to ensure that all hairs are treated.
Touch-up phase
After the initial treatment phase (4-5 treatments), we recommend touch-ups
every 4 to 8 weeks, when you see hairs growing back. This is to maintain
results and enjoy smooth skin for months. The time between treatments
may vary based on your individual hair regrowth and also across different
body areas.
19
English
Recommended attachment & treatment time per area
After use
Common skin reactions
Your skin may show slight redness and/or may prickle, tingle or feel warm.
This reaction is absolutely harmless and disappears quickly.
Dry skin and itching may occur due to shaving or a combination of shaving
and light treatment. You can cool the area with an ice pack or a wet face
cloth. If dryness persists, you can apply a non-scented moisturizer on the
treated area 24 hours after the treatment.
20
English
Rare side effects
-
Burns, excessive redness (e.g. around hair follicles) and swelling:
these reactions occur rarely. They are the result of using a light
intensity that is too high for your skin tone. If these reactions do
not disappear within 3 days, we advise you to consult a doctor.
Wait with the next treatment until the skin has healed completely
and make sure you use a lower light intensity.
-
Skin discoloration: this occurs very rarely. Skin discoloration
manifests itself as either a darker patch (hyperpigmentation) or a
lighter patch (hypopigmentation) than the surrounding area. This is
the result of using a light intensity that is too high for your skin
tone. If the discoloration does not disappear within 2 weeks, we
advise you to consult a doctor. Do not treat discolored areas until
the discoloration has disappeared and your skin has regained its
normal skin tone.
-
Skin infection is very rare but is a possible risk following a
(micro)wound, a skin burn, skin irritation etc.
-
Epidermal heating (a sharply defined brownish area which often
occurs with darker skin tones and is not accompanied with skin
dryness): This reaction occurs very rarely. In case this reaction does
not disappear within 1 week, we advise you to consult a doctor.
Wait with the next treatment until the skin has healed completely
and make sure you use a lower light intensity.
-
Blistering (looks like small bubbles on the surface of the skin): this
occurs very rarely. In case this reaction does not disappear within 1
month or when the skin gets infected, we advise you to consult a
doctor. Wait with the next treatment until the skin has healed
completely and make sure you use a lower light intensity.
-
Scarring: often the secondary effect of a burn, which can take
longer than a month to heal.
21
English
-
Folliculitis (swelling around hair follicles combined with pustule
formation): this reaction occurs very rarely and is the result of
bacteria penetrating the damaged skin. In case this reaction
occurs, we advise you to consult a doctor as folliculitis may need
antibiotic ointment.
-
Excessive pain: this can occur during or after treatment if you have
used the device on skin that is not hair-free, if you use the device
at a light intensity that is too high for your skin tone, if you flash the
same area more than once and if you use the device on open
wounds, inflammations, infections, tattoos, burns, etc.
Aftercare
After use, you can safely apply lotions, creams, deodorant, moisturizer or
cosmetics to the treated areas. If you experience skin irritation or skin
redness after treatment, wait until it disappears before applying any product
to your skin. If you experience skin irritation after applying a product to your
skin, wash it off with water.
Note: when following all instructions you may still get skin reactions. In this
case stop using the device and contact the consumer care center in your
country.
Cleaning & storage
After use, switch off the device, unplug it and let it cool down.
1 Remove the attachment.
2 Moisten the soft cloth supplied with the device with a few drops of water
and use it to clean the following parts:
-
the light exit window
-
the outside surface of the attachments
-
the reflector inside the attachments
-
the reddish filter glass inside the facial attachment.
3 Let all parts air dry thoroughly.
4 Store the device in a dust-free and dry place at a temperature between 0
°C and 60 °C.
22
English
Warranty and support
If you need information or support, please visit www.philips.com/support or
read the international warranty leaflet.
Recycling
-
This symbol means that this product shall not be disposed of with normal
household waste (2012/19/EU).
-
Follow your country's rules for the separate collection of electrical and
electronic products. Correct disposal helps prevent negative
consequences for the environment and human health.
Technical specifications
SC1999, SC1997
Rated voltage 100V-240V
Rated frequency 50Hz-60Hz
Rated input 36W
Protection against electric shock Class II
Protections rating IP 30 (EN 60529)
Operating conditions Temperature:+15 ºC to 35 °C
Storage conditions temperature -25 °C to 70 °C
Storage conditions humidity
Less than 90% (non condensing)
23
English
Operating pressure 700hPa - 1060hPa
Altitude Max. 3000m
Emitted wavelengths 530nm - 1400nm
Optical exposure 2.5 - 5.0J/cm², depending on chosen setting
Maximum optical energy 20J
Pulse duration
<2.5 ms
Repetition time 1-3.5 s, depending on chosen setting
Optical homogeneity
Max. +/- 20% deviation from average optical
exposure in treatment area
Troubleshooting
This chapter summarizes the most common problems you could encounter
with the device. If you are unable to solve the problem with the information
below, visit www.philips.com/support for a list of frequently asked questions
or contact the Consumer Care Center in your country.
Problem Possible cause Solution
The device/adapter
becomes warm during use
This is normal. No action required.
When I place the device on
the skin it does not release
a flash. The ' ready to flash
light blinks orange and
then lights up orange
continuously.
You skin tone in the area to
be treated is too dark.
Treat other body areas with lighter skin
tones with Lumea.
The 'ready to flash light'
doesn't light up when I
place the attachment on
my skin, but the cooling fan
works.
The device is not completely
in contact with your skin.
Place the device at a 90 degree angle on
the skin so that the integrated safety
system is in contact with your skin.
The 'ready to flash light'
lights up white but the
device does not produce a
flash when I press the flash
button.
The device needs to be reset. To reset the device, switch it off and
switch it on again.
The device needs to be reset. To reset the device, switch it off and
switch it on again.
The intensity lights are
blinking alternately, going
from 1 to 5, then 5 to 1.
The overheat protection has
been activated.
When the overheat protection has been
activated, the fan still works. Do not
switch off the device, but let it cool down
for approx. 5 minutes until the lights stop
blinking alternately.
24
English
Problem Possible cause Solution
The skin reaction after
treatment last longer than
usual.
You have used a light
intensity setting which is too
high for you.
Select a lower intensity next
time. See chapter 'Using your Philips
Lumea', section 'Selecting the right light
intensity'..
You have used a light
intensity setting which is too
low for you.
Select a higher setting next time.
You did not flash an area
adjacent to an area you
treated before.
You have to release the flashes close to
each other.
The device is not effective on
your body hair color.
If you have light blond, blond, or red hair,
the treatment is not effective.
You do not use the device as
often as recommended.
To remove all hairs successfully, we
advice you to follow the recommended
treatment schedule. You can reduce the
time between treatments, but do not
treat more often than once every two
weeks.
The results of the
treatment are not
satisfactory.
You respond more slowly to
IPL treatment.
Continue using the device for at least 6
months, as hair regrowth can still
decrease over the course of this period.
My body attachment does
not have an integrated
glass/filter/window.
This is normal. The body attachment does not contain a
glass/filter/window.
25
English
Deutsch
Willkommen!
Willkommen in der Beauty-World von Lumea! In nur wenigen Wochen zu
seidig glatter Haut.
Philips Lumea nutzt die IPL (Intense Pulsed Light)-Technik, bekannt als die
effektivste Methode für ein dauerhaftes Epilationsergebnis. In enger
Zusammenarbeit mit Hautärzten und Dermatologen haben wir diese
lichtbasierte Technologie, die ursprünglich in professionellen
Schönheitssalons eingesetzt wurde, für die einfache und sichere
Anwendung zu Hause weiterentwickelt. Philips Lumea ist sanft, und
ermöglicht die komfortable und wirksame Behandlung mit einer für Sie
angenehmen Lichtstärke. Unerwünschter Haarwuchs ist endgültig passé.
Genießen Sie das wunderbare Gefühl haarfreier Haut, und fühlen Sie sich
schön in Ihrer Haut – jeden Tag.
Um die Unterstützung von Philips optimal nutzen zu können, sollten Sie Ihr
Produkt unter www.philips.com/welcome registrieren. Weitere
Informationen erhalten Sie unter www.philips.com/lumea. Dort finden Sie
den Rat unserer Experten, Anleitungsvideos und FAQs, um Ihren Lumea
optimal zu nutzen.
Geräteüberblick (Abb. 1)
1 Lichtaustrittsfenster mit integriertem UV-Filter
2 Aufsätze
a Körper-Aufsatz
b Aufsatz fürs Gesicht
c Aufsatz für die Bikinizone (SC1999)
3 Reflektor im Aufsatz
4 Integriertes Sicherheitssystem
5 Hauttonsensor
6 Elektrische Kontakte
7 Blitztaste
8 Öffnung für elektrische Kontakte
9 Ein-/Ausschalter
10 Lichtstärkeanzeigen (1 bis 5)
11 Bereitschaftsanzeige
12 Belüftungsschlitzes
13 Gerätestecker
14 Adapter
15 Kleiner stecker
16 Tasche (nicht abgebildet)
26
Deutsch
Wer sollte Lumea nicht verwenden?
Gegenanzeigen
Allgemeine Umstände
-
Verwenden Sie das Gerät niemals, wenn Sie der Hauttyp V oder VI
sind (Sie bekommen sehr selten einen Sonnenbrand, erreichen
sehr dunkle Sonnenbräune). In diesem Fall laufen Sie das Risiko,
Hautreizungen zu bekommen, wie beispielsweise
Hyperpigmentierung und Hypopigmentierung, starke Rötungen
oder Verbrennungen.
Hinweis: Um zu überprüfen, ob das Gerät für ihren Hauttyp geeignet
ist, sehen Sie auf der Hautfarbentabelle unter Ziffer 2 der
Ausklappseite nach.
-
Verwenden Sie das Gerät niemals während der Schwangerschaft
oder während Sie stillen, da das Gerät nicht mit schwangeren oder
stillenden Frauen getestet wurde.
-
Verwenden Sie das Gerät nicht, wenn Sie aktive Implantate wie
Herzschrittmacher, Neurostimulatoren, Insulinpumpen usw. haben.
Medikamente/Vorgeschichte
Verwenden Sie das Gerät niemals, wenn Sie eines oder mehrere der
unten aufgeführten Medikamente einnehmen:
-
Wenn Ihre Haut momentan oder in der vergangenen Woche mit
Alphahydroxysäuren (AHAs), Betahydroxysäuren (BHAs), lokal mit
Isotretinoin oder Azelainsäure behandelt wird bzw. wurde.
-
Wenn Sie in den letzten sechs Monaten eine Art von Isotretinoin-
haltigen Medikamenten Accutane oder Roaccutane eingenommen
haben. Eine Behandlung mit diesen Medikamenten kann zur Folge
haben, dass die Haut leichter aufplatzt und eher zu Wunden und
Reizungen neigt.
27
Deutsch
-
Wenn Sie photosensibilisierende Wirkstoffe oder Medikamente
einnehmen, prüfen Sie deren Beipackzettel, und benutzen Sie auf
keinen Fall das Gerät, wenn als Nebenwirkungen photoallergische
oder phototoxische Reaktionen auftreten können oder Sie
während der Einnahmezeit der Medikamente Sonnenlicht meiden
sollen.
-
Wenn Sie Medikamente zur Blutverdünnung (einschließlich hoher
Dosen von Aspirin) einnehmen und die Behandlung ein Absetzen
des Medikaments mindestens eine Woche vor jeder Behandlung
nicht zulässt.
Verwenden Sie das Gerät keinesfalls in folgenden Situationen:
-
Wenn Sie in den letzten drei Monaten eine Bestrahlungstherapie
oder Chemotherapie erhielten.
-
Wenn Sie Schmerzmittel einnehmen, welche die Haut weniger
wärmeempfindlich machen.
-
Wenn Sie Immunsuppressiva einnehmen.
-
Wenn Sie an den betroffenen Körperzonen in den letzten drei
Wochen operiert wurden.
Symptome/Störungen
Verwenden Sie das Gerät keinesfalls in folgenden Situationen:
-
Bei Diabetes oder anderen systemischen oder
Stoffwechselkrankheiten.
-
Wenn Sie eine kongestive Herzkrankheit haben.
-
Wenn Sie unter einer Krankheit in Verbindung mit
Lichtempfindlichkeit leiden, zum Beispiel polymorphe
Lichtdermatose (PMLE), Lupus, Urticaria solaris, Porphyrie usw.
-
Sie unter Kollagenstörungen leiden, einschließlich der Bildung von
Wulstnarben oder schlechter Wundheilung.
-
Wenn Sie Epileptiker/in mit Blitzlichtempfindlichkeit sind.
-
Wenn Ihre Haut lichtempfindlich ist und auf Licht mit Ausschlag
reagiert oder eine allergische Reaktion zeigt.
28
Deutsch
-
Wenn Sie unter einer Hautkrankheit leiden (z. B. aktivem
Hautkrebs) bzw. bereits einmal Hautkrebs oder eine andere lokale
Krebserkrankung an den zu behandelnden Hautpartien hatten.
-
Wenn Sie unter einer Gefäßkrankheit leiden und die zu
behandelnden Körperpartien zum Beispiel Krampfadern oder
Gefäßerweiterungen aufweisen.
-
Wenn Sie Bluter/in sind.
-
Wenn Sie unter einem Immundefekt leiden (einschließlich HIV oder
AIDS).
Hautzustand
Verwenden Sie das Gerät keinesfalls in folgenden Situationen:
-
Wenn Sie an den zu behandelnden Hautpartien Infektionen,
Ekzeme, Verbrennungen, entzündete Follikel, offene Wunden,
Abschürfungen, Herpes simplex (Lippenbläschen), Wunden oder
Läsionen und Blutergüsse haben.
-
Auf gereizter (roter oder beschädigter), sonnenverbrannter,
kürzlich gebräunter oder künstlich gebräunter Haut.
-
In den folgenden Bereichen: An Körperpartien mit Muttermalen,
Sommersprossen, großen Venen, dunkler pigmentierten
Hautstellen, Narben, Hautanomalien, ohne zuvor einen Arzt
konsultiert zu haben. Dies kann zu Verbrennungen und
Hautverfärbung führen, wodurch die Diagnose von
Hautkrankheiten erschwert werden kann.
-
In den folgenden Bereichen: An Warzen, Tätowierungen oder
permanentem Make-Up.
Anwendungsbereiche
Verwenden Sie das Gerät niemals an den folgenden Partien:
-
Im Bereich der Augen oder der Augenbrauen.
29
Deutsch
-
An Lippen, Brustwarzen, Brustwarzenhöfen, inneren Schamlippen,
Vagina, Anus und in Nase und Ohren.
-
Männer sollten das Gerät nicht im Gesicht, am Hals (einschließlich
sämtlicher Bartzonen) oder im Genitalbereich verwenden.
-
An Bereichen, wo Sie ein langanhaltendes Deodorant verwenden.
Dies kann zu Hautreizungen führen.
-
Über oder in der Nähe von künstlichen Materialien wie
Silikonimplantaten, subkutanen Injektionsports (Insulinspendern)
oder Piercings.
Hinweis: Diese Aufzählung erhebt keinen Anspruch auf
Vollständigkeit. Wenn Sie nicht sicher sind, ob Sie das Gerät
verwenden können, konsultieren Sie bitte Ihren Arzt.
Wichtig
Gefahr
-
Gerät und Adapter dürfen nicht nass werden.
-
Berühren Sie keine inneren Komponenten, wenn das Gerät
beschädigt ist, um einen Stromschlag zu vermeiden.
-
Wasser und Elektrizität sind eine gefährliche Kombination!
Verwenden Sie das Gerät nicht in einer feuchten Umgebung, z. B.
in der Nähe einer Badewanne, einer Dusche oder eines
Schwimmbeckens.
Warnhinweis
-
Dieses Gerät sind für Benutzer (einschl. Kinder) mit
eingeschränkten physischen, sensorischen oder geistigen
Fähigkeiten nur dann geeignet, wenn eine angemessene Aufsicht
oder ausführliche Anleitung zur Benutzung des Gerätes durch eine
verantwortliche Person sichergestellt ist.
30
Deutsch
-
Achten Sie darauf, dass Kinder nicht mit dem Gerät spielen.
-
Das Gerät ist für Kinder unter 15 Jahren nicht vorgesehen.
Teenager zwischen 15 und 18 Jahren sollten das Gerät nur unter
Aufsicht bzw. Anleitung ihrer Eltern oder Erziehungsberechtigten
nutzen. Erwachsene, die 18 Jahre oder älter sind, können das Gerät
ohne Einschränkung nutzen.
-
Überprüfen Sie das Gerät vor jedem Gebrauch. Verwenden Sie das
Gerät oder den Adapter nicht, wenn Beschädigungen daran
erkennbar sind.
-
Verwenden Sie das Gerät nicht, wenn der UV-Filter des
Lichtaustrittsfensters beschädigt ist.
-
Modifizieren, trennen oder öffnen Sie den Adapter oder das Kabel
nicht, da dies eine Gefährdung darstellt.
-
Markieren Sie die zu behandelnden Bereiche nicht mit einem
Bleistift oder anderen Stift. Dies kann zu Hautverbrennungen
führen.
-
Haarentfernung durch intensive Stoßlichtquellen kann bei
einzelnen Personen zu verstärktem Haarwuchs führen. Anhand der
zurzeit vorliegenden Daten sind die Gruppen mit dem höchsten
Risiko dieser Reaktion Frauen mit Vorfahren aus dem
Mittelmeergebiet, dem Nahen Osten oder Südasien, die sich an
Gesicht und Hals behandeln lassen.
-
Das Lichtaustrittsfenster kann nach dem Gebrauch sehr heiß sein.
Berühren Sie den inneren Teil des Lichtaustrittsfensters, erst nach
dem Abkühlen.
-
Verwenden Sie nur das im Lieferumfang des Geräts enthaltene
abnehmbare Netzteil (A00440), um den Akku wieder aufzuladen
(siehe Symbol).
31
Deutsch
Hinweis: Wenn Sie eine Hauttonveränderung nach Ihrer letzten
Behandlung bemerken (z. B. in Form einer Bräunung), empfehlen wir
Ihnen, den Hauttest durchzuführen und vor der nächsten
Behandlung 30 Minuten zu warten.
So vermeiden Sie Beschädigungen:
-
Stellen Sie sicher, dass nichts den Luftstrom durch die
Belüftungsschlitze des Geräts blockiert.
-
Setzen Sie das Gerät keinen schweren Stößen aus, schütteln Sie es
nicht, und lassen Sie es nicht fallen.
-
Wenn das Gerät extremen Temperaturunterschieden ausgesetzt
war, warten Sie etwa 3 Stunden, bevor Sie es benutzen.
-
Bewahren Sie das Gerät an einem staubfreien und trockenen Ort
auf.
-
Setzen Sie das Gerät während des Gebrauchs keinen
Temperaturen unter 5 °C oder über 35 °C aus.
-
Setzen Sie das Gerät nicht über mehrere Stunden direktem
Sonnen- oder UV-Licht aus, um Schäden zu vermeiden.
Achtung
-
Das Gerät ist ausschließlich zum Entfernen von unerwünschtem
Körperhaar unterhalb des Halses vorgesehen. Verwenden Sie es
für keinen anderen Zweck. Ansonsten könnte es gefährlich für Sie
werden. Männer dürfen das Gerät nicht im Gesicht und am Hals
oder für den Bart oder Schamhaar verwenden.
-
Dieses Gerät ist nicht waschbar. Tauchen Sie das Gerät niemals in
Wasser. Spülen Sie das Gerät auch nicht unter fließendem Wasser
ab.
-
Aus hygienischen Gründen sollte das Gerät von nur einer Person
benutzt werden.
32
Deutsch
6 Nach dem Hauttest warten Sie 24 Stunden und prüfen, wie Ihre Haut
reagiert hat. Falls Ihre Haut Reaktionen zeigt, wählen Sie für die
nachfolgende Behandlung die höchste Einstellung, die keine
Hautreaktion hervorgerufen hat. Der Hauttest sollte in allen Bereichen
durchgeführt werden, die Sie behandeln möchten.
So verwenden Sie Ihr Philips Lumea
Hauttonsensor
Als zusätzliche Sicherheit misst der integrierte Hauttonsensor den Hautton
zu Beginn jeder Sitzung sowie gelegentlich während der Sitzung. Ist der
erkannte Hautton zu dunkel für die Behandlung mit Lumea, schaltet sich das
Gerät automatisch aus, um die Entstehung von Hautreaktionen zu
vermeiden. In diesem Fall gibt das Gerät also beim Drücken der Blitztaste
keine Lichtimpulse aus.
Aufsätze
Ansetzen und Abnehmen
Zum Platzieren des Aufsatzes, drücken Sie es einfach auf das
Lichtaustrittsfenster bis es einschnappt.
Zum Entfernen des Aufsatzes ziehen Sie es vom Lichtaustrittsfenster ab.
Körper-Aufsatz
Mit dem Aufsatz für den Körper können Sie unerwünschtes Haar an
verschiedenen Körperpartien unterhalb der Halslinie behandeln. Er eignet
sich für die Behandlung größerer Bereiche, wie zum Beispiel der Beine.
Aufsatz fürs Gesicht (SC1999)
Der Aufsatz für das Gesicht enthält einen zusätzlichen integrierten Lichtfilter
für extra Sicherheit, sodass Sie ihn zur Behandlung von unerwünschtem
Gesichtshaar an Oberlippe, Kinn und Wangen einsetzen können.
Achtung:
-
Verwenden Sie Lumea nicht für die Augenbrauen.
-
Wenn Sie den Bereich über Ihrer Oberlippe behandeln, achten Sie
darauf, Ihre Lippe nicht mit einem Lichtimpuls zu treffen.
37
Deutsch
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips SC1999 Lumea at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips SC1999 Lumea in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 3,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info