561198

Philips SC1996 - Lumea Essential Manual

24
Zoom out
Zoom in
Previous page
1/146
Next page
Problem Possible cause Solution
If this does not work, place the appliance on a part of
your body where it is easy to establish full skin contact, for
example on your lower arm. Then check if the ‘ready to
ash’ light works. If the ‘ready to ash’ light still does not start
blinking when you place the appliance on the skin, contact the
Consumer Care Centre in your country, your Philips dealer
or a Philips service centre.
The ‘ready to ash’
light rst blinks
orange and then
lights up orange
continuously
when I place
the appliance on
the skin and the
appliance does not
release a ash.
The skin you are
trying to treat is
too dark.
To prevent your skin from developing side effects, the
appliance does not work on skin that is too dark. You might
be able to use Philips Lumea Essential on lighter coloured
body parts. If this does not work either, contact the
Consumer Care Centre in your country, your Philips dealer
or a Philips service centre.
The ‘ready to
ash’ light does
not work when
I place the
attachment on
my skin, but the
cooling fan works.
The overheat
protection has
been activated.
When the overheat protection has been activated, the fan
still works. Do not switch off the appliance. Let it cool down
for approx. 15 minutes before you continue to use it. After
5 minutes the appliance switches off automatically. Then let
it cool down for 10 more minutes. If the ‘ready to ash’ light
still does not work when you place the appliance on the
skin, contact the Consumer Care Centre in your country,
your Philips dealer or a Philips service centre.
The ‘ready to
ash’ light lights up
continuously, but
the appliance does
not produce a
ash when I press
the ash button.
The appliance
needs to be reset.
To reset the appliance, switch off the appliance and switch it
on again. If the ‘ready to ash’ light lights up continuously, but
the appliance still does not produce a ash when you press
the ash button, contact the Consumer Care Centre in your
country, your Philips dealer or a Philips service centre.
Intensity light
1 continues to
blink and I cannot
change the setting.
The attachment is
not placed on the
appliance properly.
Place the attachment on the appliance properly.
All intensity lights
go on alternately.
The appliance
needs to be reset.
To reset the appliance, switch off the appliance and switch it
on again. If the intensity lights continue to go on alternately,
contact the Consumer Care Centre in your country, your
Philips dealer or a Philips service centre.
All intensity
lights are blinking
simultaneously.
The appliance is
defective.
Contact the Consumer Care Centre in your country, your
Philips dealer or a Philips service centre.
The appliance
produces a strange
smell.
The attachment
and/or the lter
glass is dirty.
Clean the attachment and the light exit window carefully. If
you are unable to clean the attachment properly, contact the
Consumer Care Centre in your country, your Philips dealer
or a Philips service centre to replace the attachment.
ENGLISH24
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips SC1996 - Lumea Essential at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips SC1996 - Lumea Essential in the language / languages: English, German, Dutch, French, Italian, Turkish as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info