User Guide
50
3 Tap the Revert button.
4 Tap Revert to confirm the action.
How do I calibrate the touch screen?
The Remote Control is calibrated when it leaves the factory. It is possible you have
to calibrate the touch screen:
• when the touch screen buttons do not respond properly.
Complete instructions 1 to 6 in “Calibrating the touch screen” described below.
• when the Remote Control displays a message to calibrate the touch screen.
Complete instructions 4 and 5 in “Calibrating the touch screen” described
below.
Calibrating the touch screen
1 Touch and hold the Remote Control icon for three seconds.
The Remote Control switches to Setup
mode.
2 Scroll to the second setup panel.
3 Tap the Calibrate button .
The first instruction “Touch TOP LEFT corner” appears.
4 Tap as close as possible in the upper left corner using a blunt tip of a
pencil.
The second instruction “Touch BUTTOM RIGHT corner” appears.
5 Tap as close as possible in the upper right corner using a blunt tip of a
pencil.
The setup panel appears again.
6 Tap the Remote Control icon .
The Remote Control switches to Use mode.
Why does a device respond to some RF signals and not to others?
It is possible that a device does not respond properly when operated with RF
signals. This is mostly due to IR signals that cannot be properly transmitted as RF
signals.
In that case, you have to reconfigure the Remote Control to operate the device
with IR signals again.
FAQ
