48663
46
Zoom out
Zoom in
Previous page
1/60
Next page
User Guide
46
General Problems
The display is black
Tap the screen to make sure the Remote Control is turned on.
Tilt the Remote Control to make sure the Remote Control is turned on.
Press the Backlight button to make sure the Remote Control and the backlight
are turned on.
See “Activating the Remote Control” on page 6.
Adjust the contrast using the contrast dial on the left side of the Remote
Control.
Make sure the battery pack is properly installed.
See “Installing the Battery Pack” on page 4.
Make sure the battery pack is charged sufficiently.
See “Charging the Remote Control” on page 5.
The display is too light or too dark
Adjust the contrast dial on the left side.
Adjust the brightness of the display in the Settings (see p. 18).
The Remote Control shuts off automatically
This is a feature of the Remote Control to save power. You can change the
time the Remote Control stays on in the Settings (see p. 18).
The touch screen buttons on the Remote Control do not respond properly
Calibrate the touch screen (see p. 50).
Devices do not respond to commands from the Remote Control
Make sure the Remote Control is in Use mode (see p. 22).
Make sure the Remote Control’s sending eye is pointed towards the device
you’re operating.
Check if the Low Battery icon is flashing at the right top of the touch screen.
If so, recharge the battery pack.
Check if you have defined the correct brands for your devices.
Check if the button you are trying to use is assigned properly via Brand mode
(see p. 24) or via Learn mode (see p. 25).
Check if your device understands Philips-Marantz RC codes. Normally you can
find this in the documentation of your device.
If you have set up your Remote Control to operate devices with RF signals:
Check in the RF IR mode if the devices you want to operate are set up
properly (see p. 39).
Check if the Extender ID and the Channel on your Remote Control match
the ID and the Channel (CH) on the RF Extender.
Make sure the RF Extender is placed near the devices you want to use
with RF signals.
Change the Channel if you notice interferences from other RF channels
(see p. 42).
Troubleshooting
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips SBCRU970 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips SBCRU970 in the language / languages: English as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info