User Guide
11
3 Tap OK when the device reacts.
The Remote Control switches to Try mode. Continue with step 5.
Note The name of the responding code set is displayed when you tap the OK
button, so you know which code set to select from the list after you have
tried out other code sets.
5 Tap Next.
The first control panel of selected device is displayed.
6 Try out the buttons on the different control panels and check if the
device is responding to the RC codes the Remote Control is sending.
Note Even when the device is responding to the current code set, it is advised to
try out other code sets. When your device responds to more than one code
set, install the most suitable one.
7 When you are satisfied with the way the device is responding to the
selected code set, tap Install.
-or-
When you are not satisfied with the selected code set, tap Back to
select another code set.
When the RC codes for your device are installed, the Remote Control beeps
and returns to Use mode. Your brand is now defined for the selected device.
8 Define all other devices on the Home panel you want to operate.
Getting Started
