48593
29
Zoom out
Zoom in
Previous page
1/40
Next page
User Manual
29
Troubleshooting
General Problems
The display stays blank or becomes black
Make sure the batteries are properly installed.
See “The Batteries” on page 3.
Press the Backlight button to make sure ProntoNEO and the backlight are
turned on.
See ‘Turning on the Display and the Backlight’ on p. 6.
Adjust the contrast using the Backlight button and the Page Up or Page Down
buttons on the left side of ProntoNEO.
See ‘Changing the LCD Contrast’ on p. 7.
The display is too light or too dark
Adjust the contrast using the Backlight button and the Page Up or Page Down
buttons on the left side of ProntoNEO.
See ‘Changing the LCD Contrast’ on p. 7.
ProntoNEO shuts off automatically
This is a timeout feature of the ProntoNEO to save power. You can change
the time ProntoNEO stays on in the Settings.
See ‘Adjust the LCD Timeout’ on p. 12.
Devices do not respond to commands from ProntoNEO
Make sure ProntoNEO is in Use mode. See ‘Working with Modes’ on p. 10.
Make sure ProntoNEO’s sending LED is pointed towards the device you’re
operating.
Check if the battery level is low. If so, replace the batteries.
See ‘The Batteries’ on page 3.
Check if you have defined the correct brands for your devices.
See ‘Defining the Brands of Your Devices’ on p.15.
Check if the button you are trying to use is assigned properly via Brand mode,
Learn mode or Macro mode. See ‘Defining the Brands of Your Devices’ on
p. 15, ‘Learning Commands’ on p. 18 and ‘Recording Macros’ on p. 21.
ProntoNEO does not learn commands from an existing remote control
Press and hold the buttons on the existing remote control for a longer or
shorter period of time.
Make sure the distance between the ProntoNEO and the existing remote
control is between 1 and 4 inches (2 to 10 cm).
See ‘Learning Commands’ on p. 18.
Do not learn commands directly under fluorescent lights.
Do not learn commands on a reflecting table surface.
Check if the battery level is low. If so, replace the batteries.
See ‘The Batteries’ on page 3.
Check if there is sufficient memory to learn commands. If not, revert the
ProntoNEO. See ‘ProntoNEO Information’ and ‘Revert’ on p. 14.
ProNeo 01-08-2001 14:40 Pagina 29
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips SBCRU930 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips SBCRU930 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips SBCRU930

Philips SBCRU930 User Manual - German - 46 pages

Philips SBCRU930 User Manual - Dutch - 47 pages

Philips SBCRU930 User Manual - French - 47 pages

Philips SBCRU930 User Manual - Italian - 47 pages

Philips SBCRU930 User Manual - Spanish - 47 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info