English
5
Easy transmission
The FM headphone is able to receive signals
from the transmitter, even through barriers
such as doors, walls and windows.
Multiple headphones with one
transmitter
An additional number of headphones
and/or wireless speakers can be used with a
single transmitter if they:
- operate in the 864 MHz band
- can detect a 19 kHz pilot tone.
Please consult the appliance’s electrical
specification sheets for confirmation on
compatibility.
Kit contents
This FM headphone system consists of the
following accessories:
1 x SBC HC8352 FM transmitter
1 x SBC HC8355 FM headphone
1 x SBC CS030/00 12Volt / 200mA AC/DC
adapter (for UK: SBC CS030/05 12 Volt/
200 mA AC/DC adapter)
2 x rechargeable batteries LR03/AAA
(NiCd), 550 mAh
1 x 3.5 mm plug to 6.3 mm stereo adapter
plug
1 x antenna tube
Transmitter (figure 1)
1 Recharging indicator – the green LED
lights up during recharging. Completely flat
batteries will be fully charged after about 16
hours.
2 Power indicator – lights up when audio
signals are detected at the audio input.
3 Recharging compartment – just place
the batteries in the transmitter’s battery
compartment.The green LED lights up
during recharging.
4 DC power – connect to the 12 Volt/
200 mA AC/DC adapter
5 3.5 mm stereo headphone audio
input – connects your FM transmitter to
an audio source
6 Channel switch – select one of
2 channels for best reception.We advise
you to select channel 1 as a first option.
7 Controls plate
Headphone (figure 2)
8 Power indication – lights up when in use.
9 Power On/Off – slide the switch to the
on or off position to switch the headphone
on/off.
10 Battery compartment – remove the
earcushion, take out the batteries and put
them in the transmitter’s recharging
compartment for recharging.
11 Volume – adjust volume to your desired
listening level.
12 Tuning – turn the tuning wheel until the
signal is at its clearest.
General information Controls
XP SBC HC 8350/00-1 11-06-2001 10:48 Pagina 5
