565697
104
Zoom out
Zoom in
Previous page
1/116
Next page
102
ENGLISH
Machine actions Causes Solutions
The machine takes a long
time to warm up or the
amount of water dispensed
from the wand is too little.
The machine circuit is clogged by
limescale.
Descale the machine.
The brew group cannot be
removed.
The brew group is out of place. Turn on the machine. Close the service
door. The brew group automatically
returns to the initial position.
The co ee grounds drawer is
inserted.
Remove the co ee grounds drawer
before removing the brew group.
There is too much ground
co ee under or over the
brew group.
The co ee used may not be suitable
for automatic machines.
It may be necessary to change the type
of co ee or the co ee grinder settings
(see the Adjusting the Ceramic Co ee
Grinder” chapter).
The machine is adjusting the co ee
grinder for a new kind of co ee
beans or pre-ground co ee.
The machine automatically adjusts itself
after brewing several cups of co ee to
optimise the extraction in relation to the
compactness of the ground co ee.
It may be necessary to brew 2 or 3
products to adjust the co ee grinder
completely.
This is not a malfunction of the machine.
The machine produces too
humid or too dry co ee
grounds.
Adjust the co ee grinder. Adjusting the ceramic co ee grinder af-
fects the quality of residues.
If the residues are too humid, set a coarser
grind.
If the residues are too dry, set a  ner
grind.
Refer to the Adjusting the Ceramic Co ee
Grinder” chapter.
The machine grinds co ee
beans but no co ee comes
out.
(see note).
There is no water. Fill the water tank and prime the circuit
(see the "Manual Rinse Cycle" chapter).
The brew group is dirty. Clean the brew group (see the "Weekly
Cleaning of the Brew Group" chapter).
This might occur when the machine
is automatically adjusting the dose.
Brew some cups of co ee as described in
the “Saeco Adapting System chapter.
The dispensing spout is dirty. Clean the dispensing spout.
Co ee is too weak
(see note).
This might occur when the machine
is automatically adjusting the dose.
Brew some cups of co ee as described in
the “Saeco Adapting System chapter.
The ground co ee is too coarse. Change co ee blend or adjust grinding as
explained in the Adjusting the Ceramic
Co ee Grinder chapter.
The co ee bean hopper selector
switch has been shifted.
Move the selector switch to the
position.
104


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips-Saeco HD8968 GranBaristo Avanti at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips-Saeco HD8968 GranBaristo Avanti in the language / languages: English as an attachment in your email.

The manual is 6,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips-Saeco HD8968 GranBaristo Avanti

Philips-Saeco HD8968 GranBaristo Avanti User Manual - German - 112 pages

Philips-Saeco HD8968 GranBaristo Avanti User Manual - Dutch - 112 pages

Philips-Saeco HD8968 GranBaristo Avanti User Manual - French - 116 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info