526011

Philips-Saeco HD8964 GranBaristo Manual

82
Zoom out
Zoom in
Previous page
1/92
Next page
80
ENGLISH
Machine actions Causes Solutions
Milk does not froth. The milk dispensing spout has not
been pulled out
Check that the milk dispensing spout has
been pulled out correctly up to the “
” icon
The carafe has not been correctly
reassembled or with all its compo-
nents.
Make sure the wand is correctly inserted.
All its components have to be correctly
reassembled, as described in the “Weekly
cleaning of the Milk Carafe” section.
The machine takes a long
time to warm up or the
amount of water dispensed
from the wand is too little.
The machine circuit is clogged by
limescale.
Descale the machine.
The brew group cannot be
removed.
The brew group is out of place. Turn the machine on. Close the service
door. The brew group automatically
returns to the initial position.
The co ee grounds drawer is
inserted.
Remove the co ee grounds drawer
before removing the brew group.
There is too much ground
co ee under or over the
brew group.
The co ee used may not be suitable
for automatic machines.
It may be necessary to change the type of
co ee or the co ee grinder settings (see
“Adjusting the Ceramic Co ee Grinder”
chapter).
The machine is adjusting the co ee
grinder for a new kind of co ee
beans or pre-ground co ee.
The machine automatically adjusts itself
after brewing several cups of co ee to
optimise the extraction in relation to the
compactness of the ground co ee.
It may be necessary to brew 2 or 3
products for the co ee grinder to adjust
completely.
This is not a malfunction of the machine.
The machine produces too
humid or too dry co ee
grounds.
Adjust the co ee grinder. Adjusting the ceramic co ee grinder af-
fects the quality of residues.
If the residues are too humid, set a coarser
grind.
If the residues are too dry, set a  ner
grind.
Refer to the “Adjusting the Ceramic Co ee
Grinder” chapter.
The machine grinds the
co ee beans but no co ee
is brewed (see note).
There is no water. Fill the water tank and prime the circuit
(see the "Manual Rinse Cycle" chapter).
The brew group is dirty. Clean the brew group (see the "Weekly
Cleaning of the Brew Group" chapter).
This might occur when the machine
is automatically adjusting the dose.
Brew a few co ees as described in chap-
ter “Saeco Adapting System”.
The dispensing spout is dirty. Clean the dispensing spout.
… 82 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips-Saeco HD8964 GranBaristo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips-Saeco HD8964 GranBaristo in the language / languages: English as an attachment in your email.

The manual is 4,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips-Saeco HD8964 GranBaristo

Philips-Saeco HD8964 GranBaristo User Manual - German - 88 pages

Philips-Saeco HD8964 GranBaristo User Manual - Dutch - 88 pages

Philips-Saeco HD8964 GranBaristo User Manual - French - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info