604505

Philips-Saeco HD8906 - Intelia de Luxe Manual

12
Zoom out
Zoom in
Previous page
1/68
Next page
Interruption of the descaling cycle
Once the descaling cycle has started, you must complete it till the very end without turning off the
machine. In case you get stuck during the cycle or in case of power failure or accidental
disconnection of the power cord, you can exit by pressing the standby button. If this occurs, empty
and rinse carefully the water tank, then ll it up to the CALC CLEAN level. Follow the instructions
in chapter ‘First installation’, section ‘Manual rinsing cycle’ before brewing any beverage. If the cycle
was not completed, the machine will require another descaling cycle to be performed at your
earliest convenience.
Cleaning and maintenance
Cleaning the brew group
Clean the brew group once per week. Check the online manual for more detailed information
about the monthly cleaning of the brew group.
1 Remove the coffee grounds container and open the service door.
2 Remove the coffee residues drawer (Fig. 25).
3 To remove the brew group, press the lever and pull the brew group out of the machine
(Fig. 26).
4 Rinse the brew group with fresh water.
5 To place the brew group back, make sure that the lever is in contact with the base of the
brewing unit (Fig. 27).
Note: If it is not in contact with the base, push it down.
6 Make sure the locking hook of the brew group is in the correct position.
To position the hook correctly, push it upwards until it is in uppermost position (Fig. 28).
7 The hook is not correctly positioned if it is still in bottommost position (Fig. 29).
8 Slide the brew group back into the machine along the guiding rails on the sides until it clicks
into position. Then place the coffee residues drawer back in the machine.
Lubrication
Lubricate the brew group after approximately 500 cups of coffee or once a month.
1 Apply some lubricant around the shaft in the bottom of the brewing unit. (Fig. 30)
2 Apply lubricant to the rails on both sides, as shown in the illustration. (Fig. 31)
3 Slide the brew group back into the machine along the guiding rails on the sides until it clicks
into position. Then place the coffee residues drawer back in the machine.
Milk carafe quick clean
Between brewing milk varieties you can rinse the spout with hot water to make sure every milk
recipe is optimal.
1 Place a cup or container under the spout to collect the water.
2 Turn the milk dispensing spout to the ‘I’ position.
3 PresstheCARAFEQUICKCLEANbutton.
ENGLISH12
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips-Saeco HD8906 - Intelia de Luxe at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips-Saeco HD8906 - Intelia de Luxe in the language / languages: English as an attachment in your email.

The manual is 2,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips-Saeco HD8906 - Intelia de Luxe

Philips-Saeco HD8906 - Intelia de Luxe User Manual - Dutch - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info