459480
34
Zoom out
Zoom in
Previous page
1/36
Next page
• 31 •
TROUBLESHOOTING
Machine Actions Causes Solutions
The machine does not turn on. The machine is not connected to the electric net-
work.
Connect the machine to the electric network.
The co ee is not hot enough The cups are cold. Preheat the cups with hot water.
No hot water or cappuccino comes out. The milk group is clogged. Clean the milk group.
Make sure that the machine is turned o and has
cooled before performing this operation.
The co ee has not enough crema.
(See note)
The coffee blend is unsuitable, the coffee is not
freshly roasted or the grind is too coarse.
Change co ee blend or adjust the grind as explained in
section "Co ee Grinder Adjustment".
The machine takes a long time to warm up
or the amount of water dispensed from the
wand is too little.
The machine circuit is clogged by limescale. Descale the machine.
The brew group cannot be removed. The brew group is out of place. Turn on the machine. Close the service door. The brew
group automatically returns to the correct position.
The co ee grounds drawer is inserted. Remove the coffee grounds drawer before removing
the brew group.
The machine grinds the co ee beans but
no co ee comes out.
(See note)
There is no water. Fill the water tank and prime the circuit (section "Using
the Machine for the First Time").
The brew group is dirty. Clean the brew group (section "Brew Group").
The circuit is not primed. Prime the circuit (section "Using the Machine for the
First Time").
Rare event that occurs when the machine is auto-
matically adjusting the dose.
Brew a few coffees as described in section “Saeco
Adapting System.
The dispensing spout is dirty. Clean the dispensing spout.
The co ee is too weak.
(See note)
Rare event that occurs when the machine is auto-
matically adjusting the dose.
Brew a few coffees as described in section “Saeco
Adapting System.
Co ee is brewed slowly.
(See note)
The co ee grind is too  ne. Change co ee blend or adjust the grind as explained in
section "Co ee Grinder Adjustment".
The circuit is not primed. Prime the circuit (section "Using the Machine for the
First Time").
The brew group is dirty. Clean the brew group ("Brew Group" section).
Co ee leaks out of the dispensing spout. The dispensing spout is clogged. Clean the dispensing spout and its holes.
Note: These problems can be considered normal if the co ee blend has been changed or the machine is being installed for
the  rst time. In this case wait until the machine performs a self-adjusting operation as described in section "Saeco Adapt-
ing System".
Please contact customer service for any problems not covered in the above table or when the suggested solutions do not
solve the problem.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips-Saeco HD8838 Syntia at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips-Saeco HD8838 Syntia in the language / languages: English as an attachment in your email.

The manual is 3,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips-Saeco HD8838 Syntia

Philips-Saeco HD8838 Syntia User Manual - German - 32 pages

Philips-Saeco HD8838 Syntia Additional guide - Dutch - 3 pages

Philips-Saeco HD8838 Syntia User Manual - Dutch - 32 pages

Philips-Saeco HD8838 Syntia User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info