526013
66
Zoom out
Zoom in
Previous page
1/72
Next page
64
ENGLISH
Note:
These problems can be considered normal if the co ee blend has been
changed or if the machine has just been installed. In this case wait until the
machine performs a self-adjusting operation as described in section "Saeco
Adapting System".
Machine actions Causes Solutions
Co ee is too weak
(see note).
This might occur when the machine is
automatically adjusting the dose.
Brew a few co ees as described in chap-
ter “Saeco Adapting System.
The co ee is too coarse. Change co ee blend or adjust the grind
as explained in chapter "Adjusting the
Ceramic Co ee Grinder".
The co ee bean hopper selector has
been shifted.
Switch the selector to the
position.
Co ee is brewed slowly
(see note).
The co ee grind is too  ne. Change co ee blend or adjust the grind
as explained in chapter Adjusting the
Ceramic Co ee Grinder”.
Circuits clogged. Perform a descaling cycle.
The circuit is not primed. Prime the circuit (chapter “Using the
machine for the  rst time”).
The brew group is dirty. Clean the brew group ("Weekly Cleaning
of the Brew Group" chapter).
Co ee leaks out of the dispensing
spout.
The dispensing spout is clogged. Clean the dispensing spout and its holes.
The selector is locked. Some co ee beans may have got stuck. Move the selector and repeat this move-
ment until the bean is released.
The co ee bean hopper cannot
be inserted.
The blade placed under the co ee
bean hopper has been shifted.
Shift the blade to the end of its guide
covering the hole.
There may be some co ee beans left in
the co ee bean hopper compartment.
Remove the beans.
The selector is not in the correct posi-
tion.
Put the selector in the open position.
Co ee does not taste according
to the new beans.
You have not emptied the co ee duct
and grinder.
You need to brew at least two co ees be-
fore you can taste the new co ee beans.
The milk was not frothed. The automatic milk frother has been
inserted too far. No milk is being
sucked.
Let the Automatic Milk Frother cool
down. Slightly move it downwards. Place
it back in its proper seat.
The frothed milk is too cold. The cups are cold. Preheat the cups with hot water.
The
is displayed.
The co ee bean hopper selector has
been shifted.
Switch the selector to the
position.
The co ee bean hopper and tray are
dirty.
Clean the co ee bean hopper and tray
from any co ee residuals. (Chapter
“Weekly cleaning of the co ee bean hop-
per, the tray and the compartment)
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips-Saeco HD8768 Moltio at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips-Saeco HD8768 Moltio in the language / languages: English as an attachment in your email.

The manual is 4,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips-Saeco HD8768 Moltio

Philips-Saeco HD8768 Moltio User Manual - German - 72 pages

Philips-Saeco HD8768 Moltio User Manual - Dutch - 72 pages

Philips-Saeco HD8768 Moltio User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info