671524

Philips S9031 - S9000 serie Manual

26
Zoom out
Zoom in
Previous page
1/154
Next page
Replacement reminder
The replacement reminder indicates that the shaving heads need
to be replaced.The shaving unit symbol lights up continuously,
the arrows ash white and you hear a beep when you switch o
the shaver (Fig. 11).
1 Switch o the appliance.
2 Pull the shaving head holder o the bottom part of the shaving
unit (Fig. 52).
3 Place the retaining ring holder on the retaining ring (1), turn it
anticlockwise (2) and lift it o the shaving head (3) (Fig. 62).
Remove the retaining ring from the retaining ring holder and repeat
this process for the other retaining rings.
4 Remove the shaving heads from the shaving head holder (Fig. 63).
Throw away the used shaving heads immediately to avoid mixing
them with the new shaving heads.
5 Place the shaving heads in the shaving head holder (Fig. 64).
Note: Make sure the notches on both sides of the shaving heads t
exactly onto the projections in the shaving head holder.
6
Place the retaining ring holder on the retaining ring (1), place it on the
shaving head (2) and turn it clockwise (3) to reattach the retaining ring
(Fig. 65). Repeat this process for the other retaining rings.
- Each retaining ring has two recesses that t exactly into the
projections of the shaving head holder. Turn the ring clockwise
until your hear a click to indicate that the ring is xed (Fig. 66).
Note: Hold the shaving head holder in your hand when you
reinsert the shaving heads and reattach the retaining rings (Fig. 67).
Do not place the shaving head holder on a surface when you do
this, as this may cause damage.
7 Attach the shaving head holder to the bottom part of the shaving
unit (‘click’) (Fig. 55).
8
To reset the replacement reminder, press and hold the on/o button
for approx. 7 seconds (Fig. 68). Wait until you hear two beeps.
English
26
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips S9031 - S9000 serie at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips S9031 - S9000 serie in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info