Manual Philips RQ 1290 (page 261 of 266) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

450370

261

Zoom out

Zoom in

1/266

清洁 Jet Clean 高效能清洁系统

每隔 15 天清洁一次清洗仓。

您可以用湿布擦拭 Jet Clean 高效能清洁系统的外表面。

1 同时按下 Jet Clean 高效能清洁系统两侧的释放钮 (1)。然后将 Jet Clean 高效能清洁系统从清洗仓上提起 (2)。 (图 31)

, 留下清洗仓。

2 将清洗仓中残余的清洁剂倒出。 (图 38)

您只需将清洁剂倒入水槽。

3 在水龙头下冲洗清洗仓。 (图 39)

清洗仓不可在洗碗机中清洗。

4 给清洗仓注入 HQ200 清洁剂，注入量在两线之间为宜。 (图 32)

5 将 Jet Clean 高效能清洁系统重新放在清洗仓上。 (图 33)

确保释放键卡回到位。

超彻底清洁方法

确保产品电源已关闭。

1 将剃须刀头部件竖直抽离剃须刀。 (图 23)

注意：将其抽离剃须刀时，不要转动剃须刀头部件。

2 逐一拉开三个剃须刀头。 (图 40)

3 按固定器释放卡舌 (1)，直到固定器打开 (2)。 (图 41)

注意：不要同时清洁多组刀片和网罩，因为它们都是相互匹配的。如果不小心将刀片装到了错误的网罩上，则需要数周时间才能

恢复产品的最佳剃须性能。

4 将刀片从网罩上取下。 (图 42)

5 用随附的刷子清洁刀片。 (图 43)

6 清洁网罩的内侧。 (图 44)

7 清洁后，将刀片重新装回至网罩，刀片底部朝下。 (图 45)

8 将刀片上的固定器按下。 (图 46)

9 关闭剃须刀头。

10 将剃须刀头部件的凸缘插入剃须刀顶部的槽内 (1)。然后向下按剃须刀头部件 (2) 以将其安装在剃须刀上（可听到“咔哒”一

声）。 (图 25)

清洁修发器

每次使用后都要清洁修发器。

1 向前按修发器滑块以便将修发器滑出。 (图 24)

2 在热水龙头下冲洗一会儿修发器。 (图 47)

3 向后推按修剪器滑块以使修剪器缩回。

提示：为获得最佳修剪性能，每六个月用一滴缝纫机油润滑修发器齿。

存储

1 将保护盖滑动到剃须刀头部件上，以防损坏剃须刀头。 (图 48)

2 将剃须刀存放在随附的软袋中。

更换

当显示屏上出现剃须刀头部件符号时，应更换剃须刀头部件。如果剃须刀头部件损坏则应立即更换。

为获得最佳剃须效果，我们建议您每年更换一次剃须刀头部件。

只能用原装 RQ12 飞利浦剃须刀头部件更换剃须刀头部件。

1 将旧剃须刀头部件竖直抽离剃须刀。 (图 23)

注意：将其抽离剃须刀时，不要转动剃须刀头部件。

2 将新剃须刀头部件的凸缘插入剃须刀顶部的槽内 (1)。然后向下按剃须刀头部件 (2) 以将其安装在剃须刀上（可听到“咔哒”

一声）。 (图 25)

订购附件

可选配以下附件：

- HQ8505 适配器

- RQ12 飞利浦剃须刀头部件

- HQ110 飞利浦剃须刀头清洁喷雾剂

- HQ200 飞利浦高效能清洁剂

环境

- 弃置产品时，请不要将其与一般生活垃圾堆放在一起；应将其交给官方指定的回收中心。这样做有利于环保。 (图 49)

- 内置充电电池含有可能会污染环境的物质。丢弃剃须刀时，一定要将电池取出，或将剃须刀送到官方指定的回收站。到官方指

定的电池回收站处理电池。如果您在取出电池时遇到问题，您也可以将剃须刀送至飞利浦维修中心。维修中心的员工会帮您取

出电池，并以环保的方式处理它。 (图 50)

简体中文 261

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips RQ 1290 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips RQ 1290 Manual

Product: