450373

Philips RQ 1260 Manual

9
Zoom out
Zoom in
Previous page
1/266
Next page

You can use the trimmer to groom your sideburns and moustache.
1 Pull the shaving unit straight off the shaver (Fig. 23).
Note: Do not turn the shaving unit while you pull it off the shaver.
2 Press the on/off button once to switch on the shaver.
, The display lights up for a few seconds.
3 Press the trimmer slide forwards to slide out the trimmer (Fig. 24).
4 You can now start trimming.
5 Press the trimmer slide backwards to retract the trimmer.
6 Press the on/off button once to switch off the shaver.
, The display lights up for a few seconds and shows the remaining battery capacity.
7 Insert the lug of the shaving unit into the slot in the top of the shaver (1). Then press the shaving unit downwards (2) to attach it to the
shaver (‘click’) (Fig. 25).

Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the shaver and the Jet Clean
System (specic types only).
- The best and most hygienic way to clean the shaver is in the Jet Clean System (specic types only). You can also rinse the shaver under the
tap or clean it with the cleaning brush supplied.
- Be careful with hot water. Always check if the water is not too hot, to prevent your hands from getting burnt.
- Clean the shaver after every shave for optimal shaving performance.
- You can clean the outside of the shaver with a damp cloth.
- Regular cleaning guarantees better shaving performance.

Be careful with hot water. Always check if the water is not too hot, to prevent your hands from getting burnt.
1 Rinse the shaving unit under a hot tap for some time (Fig. 26).
2 Pull open the three shaving heads one by one (Fig. 27).
3 Rinse all three shaving heads and all three hair chambers under a hot tap for 30 seconds. (Fig. 28)
Note: You can also brush the shaving heads and hair chambers with the cleaning brush supplied.
Be careful with hot water. Always check if the water is not too hot, to prevent your hands from getting burnt.
4 Carefully shake off excess water and leave the shaving heads open to let the shaving unit dry completely.
Never dry the shaving unit with a towel or tissue, as this may damage the shaving heads.

The Jet Clean system comes in two types:
- Type RQ1008 has three cleaning programs: the eco program, the auto program and the intensive program. Press the up/down button to
select the cleaning program you prefer. (Fig. 29)
Note: The eco program has a shorter drying time, to save energy. The intensive program is a more thorough cleaning program.
- Type RQ1007 has one automatic cleaning program. When you press the on/off button, the Jet Clean System starts cleaning in the
automatic cleaning program. (Fig. 30)

Fill the cleaning chamber before rst use.
1 Put the small plug in the Jet Clean System.
2 Put the adapter in the wall socket.
, The holder automatically moves to the highest position.
3 Simultaneously press the release buttons on both sides of the cleaning chamber (1). Then lift the Jet Clean System off the cleaning
chamber (2). (Fig. 31)
, The cleaning chamber remains behind.
4 Unscrew the cap from the bottle with cleaning uid.
5 Fill the cleaning chamber with HQ200 cleaning uid to a level between the two lines (Fig. 32).
6 Place the Jet Clean System back onto the cleaning chamber (Fig. 33).
Make sure the release buttons click back into place.

Note: If you use the shaver with shaving foam or shaving gel, we advise you to rinse it under the hot tap before you clean it in the Jet Clean System. This
guarantees an optimal lifetime for the cleaning uid.
1 Press the shaver tightly into the holder to lock it into place.
, The display shows that the shaver is charging (see chapter ‘The display’).
2 RQ1008: Press the up/down button to select a cleaning program.
3 Press the on/off button on the Jet Clean System to start the cleaning program. (Fig. 34)
 9
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips RQ 1260 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips RQ 1260 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info