Manual Philips RQ 1180 (page 11 of 232) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

450366

Zoom out

Zoom in

1/232

Problem Possible cause Solution

Long hairs obstruct the shaving heads. Clean the shaving heads by following the steps of the

extra-thorough cleaning method (see chapter

‘Cleaning and maintenance’).

The Jet Clean System has not cleaned the shaver

properly, because the cleaning uid in the cleaning

chamber is soiled or the cleaning uid level is too

low.

Clean the shaver thoroughly before you continue

shaving. If necessary, clean and rell the cleaning

chamber (see chapter ‘Cleaning and maintenance’).

The shaver does not work

when I press the on/off button.

The rechargeable battery is empty. Recharge the battery (see chapter ‘Charging’).

The travel lock is activated. Press the on/off button for 3 seconds to deactivate

the travel lock.

The shaving head holder is soiled or damaged to

such an extent that the motor cannot run.

Clean the shaving head holder or replace it (see

chapters ‘Cleaning and maintenance’ and

‘Replacement’).

The temperature of the shaver is too high. In this

case, the shaver does not work.

Let the shaver cool down. As soon as the

temperature of the shaver has dropped sufciently,

you can switch on the shaver again.

The shaver is not entirely clean

after I clean it in the Jet Clean

System.

The cleaning uid in the cleaning chamber is soiled. Empty and rinse the cleaning chamber.

The cleaning uid level is too low. If the uid

volume in the cleaning chamber drops below the

minimum level during the cleaning program, the

program aborts.The cleaning light and the ‘cleaning

chamber empty’ symbol ash at intervals and the

holder returns to its starting position.

Rell the cleaning chamber with cleaning uid to a

level between the two lines (see chapter ‘Cleaning

and maintenance’).

You have used another cleaning uid than the

original Philips cleaning uid.

Only use HQ200 Philips Cleaning Fluid.

The Jet Clean System does not

work when I press the on/off

button.

The Jet Clean System is not connected to the

mains.

Put the small plug in the Jet Clean System and put

the adapter in the wall socket.

There is no electrical connection between the Jet

Clean System and the shaver.

Press the shaver tightly into the holder to lock it into

place.

The shaver is not fully charged

after I charge it in the charger/

Jet Clean System.

You have not placed the shaver in the charger/Jet

Clean System properly.

Make sure you press the shaver until it locks into

place.

 11

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips RQ 1180 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips RQ 1180 Manual

Product: