492785
4
Zoom out
Zoom in
Previous page
1/19
Next page
4
ABOUT BATTERIES
NOTE: The DSS requires four (4) new AAA
alkaline batteries (not supplied). Do not mix
old and new batteries or mix alkaline with
manganese-type batteries.
Installing Batteries
1. On the back of the remote control, push
the tab and lift the battery compartment
cover off.
2. Match the + and – marks on the batteries
to the + and – marks in the battery case
and insert four (4) AAAalkaline batteries.
3. Press the battery cover back into place.
The tab should click when the cover is
locked.
4. Test the unit by pressing POWER and any
Component key (e.g., TV, VCR, CBL, etc.).
If the batteries are inserted correctly, the
red indicator light will blink once.
Battery Saver
The DSS has a Time-Out feature that will
automatically deactivate the remote control if
a key is depressed for more than 30 seconds.
This feature will help conserve the battery life
should your remote control get stuck in a
place where keys remain depressed (e.g.,
between the sofa cushions).
Replacement And Code Saver
When the batteries need replacing, the DSS
remote control will stop working and will
require four (4) new AAAalkaline batteries
for continued operation. Simply replace the
batteries,and the DSS remote control will be
restored to its full functionality, complete
with your favorite settings.
All of the codes and programmed informa-
tion will be stored,ensuring that you will not
have to reprogram the DSS remote control.
1
2
3
USING THE LIGHTED KEYPAD
When activated, the DSS remote control fea-
tures a lighted keypad that illuminates all of
the remote control keys whenever you press
any key.
1. To turn on the keypad back light,
press LIGHT once.The keypad will
remain lit for 5 seconds after you
release any key.
2. To turn off the keypad back light,
press LIGHT once again.(The key-
pad will not light whenever you
press any key.)
REM400 Manual Engl 12/28/99 12:01 PM Page 4
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips REM400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips REM400 in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info