492790

Philips REM380 Manual

9
Zoom out
Zoom in
Previous page
1/19
Next page
MCP Key (continued)
To Clear The MCP Key:
1. On the remote control,press and
hold SET until the red light
blinks twice, then release SET.
2. Enter 9-9-5.The red light will
blink twice.
3. Press MCP once.
4. Press and hold SET until the red
light blinks twice, then release
SET.
FC1 And FC2 Keys
The FC1 and FC2 keys can be setup to per-
form a number of functions with a single
key press once the selection is programmed.
Repetitive, time-consuming operations can
be grouped for easy, convenient access
through the press of one key.
The FC keys are ideal for home theater oper-
ations, setting a favorite channel, adding to
multiple component uses, guide steps or
other multiple functions you would like to
control with one key press. On one key, you
can define and program a sequence of events.
Moreover, each FC key can hold up to 15 key
presses, allowing optimal individual cus-
tomization. Below are a few examples to get
you started.
Programming A Favorite Channel
With so many channels available through
your cable system or satellite provider, a
favorite channel can be programmed for easy,
direct channel selection with one key press.
For example, let’s assume your favorite pro-
grams are on channel 71. Use the following
instructions to program the FC1 or FC2 key
for this channel:
1. On the remote control, press and
hold SET until the red light blinks
twice,then release SET.
2. Enter 9-9-5.The red light will
blink twice.
3. Press and release either FC1 or
FC2.
4. On the remote con-
trol, press TV, VCR,
CBL,or DSS once.
5. Enter 7-1.
NOTE: If you have access to over
100 channels, enter in 071.
6. Press and hold SET until the red
light blinks twice, then release
SET.
Programming A Secondary MCP Key With
Instant Channel Selection
Just like the MCP key, the FC1 and FC2 keys
can be programmed to turn on and off your
equipment. For instance, let’s say you want
your child to be able to easily turn on the
equipment and select their favorite channel.
You can setup a sequence on the FC1 or FC2
key to turn on the TV and cable box, and
then tune the cable box to a specific channel
(e.g., 11) with the push of one key.
1. On the remote control,press and
hold SET until the red light
blinks twice, then release SET.
2. Enter 9-9-5.The red light will
blink twice.
3. Press and release either FC1 or
FC2.
4. Enter the following sequence:
CBL,
POWER,
TV,
POWER,
CBL,and
1-1 (or 0-1-1 if you have access
to over 100 channels)
5. Press and hold SET until the red
light blinks twice, then release
SET.
Now when you press the programmed FC
key, the Cable box and TV will turn on and
the Cable box will tune to channel 11.
9
OPERATING YOUR REMOTE CONTROL
REM380 Manual Engl 12/28/99 12:10 PM Page 9
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips REM380 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips REM380 in the language / languages: English as an attachment in your email.

The manual is 0,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info