Manual Philips RC136 (page 12 of 16) (English)

45405

Zoom out

Zoom in

1/16

Programming the Universal Remote Control (cont’d)

Automatic Search

To automatically program your remote control to operate your TV, VCR, or DVD

Player, follow the steps below. For a VCR or DVD Player, follow the same steps but

press the VCR or DVD button at step 1.

1. Turn on your TV. Stand close to your TV (5 to 10 feet) and point your remote

control towards the remote sensor on your TV. Press TV button until LED

lights. Press and hold the number 1 and the number 3 buttons simultaneously for

3 seconds. The LED will blink twice and remain on.

2. Press the POWER button. The LED will turn off. Note: If the Power button is not

pressed within one minute, the remote will return to the previously programmed

code. The automatic search will begin after the Power button has been released.

3. Each time a code is transmitted, the LED will blink. This process could take sev-

eral minutes.

4. When the correct code is found, the TV should turn off. Immediately press the

POWER button. The LED will blink twice, then turn off. If all codes have been tried

and the TV has not turned on or off the LED will stay on briefly, then turn off.

Note: To stop the search process at any time, press any button other than the

POWER button. The LED will give a long blink and turn off. There is no guarantee

that the remote control will work with your TV, VCR, or DVD player.

Helpful Hint

• If the 3-digit code is not

entered within 60 seconds,

the LED will turn off and

the remote control will

return to the previously

programmed code.

• If the batteries are left out of

the remote for more than

two minutes, you may have

to reprogram the remote

control.

rc1364101 (1) 4/30/03 3:41 PM Page 12

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips RC136 in the language / languages: English as an attachment in your email.

The manual is 0,6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips RC136 Manual

Product: