Manual Philips qc 5070 (page 9 of 100) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

401061

Zoom out

Zoom in

1/100

- The hair length after cutting is only visible when one of the combs is

attached. Use the small comb for a hair length of 3-21mm and use

the large comb for a hair length of 23-41mm.

1 Slide the comb into the guiding grooves of the appliance

(‘click’) (Fig. 5).

Make sure that the arms of the comb have been properly slid into the

grooves on both sides.

2 Turn the length lock to set the comb to the desired hair length

setting (Fig. 6).

- The small comb cuts the hair to a length of 3mm, 6mm, 9mm, 12mm,

15mm, 18mm or 21mm.

- The large comb cuts the hair to a length of 24mm, 27mm, 30mm,

33mm, 36mm, 39mm or 42mm.

3 Switch on the appliance (Fig. 7).

Tips

- We advise you to start clipping at the highest setting of the large

comb and to reduce the hair length in small steps until you reach the

desired hair length.

- If a lot of hair has accumulated in the comb, remove the comb and

blow and/or shake the hair out of it. Removing the comb does not

change the selected hair length setting.

- Write down the hair length settings used to create a certain hairstyle

as a reminder for future clipping sessions.

Clipping without comb

You can use the clipper without comb to contour the neckline and the

area around the ears.

The comb keeps the cutting unit at a certain distance from your head.

This means that, if you use the clipper without the comb, your hair will be

cut off very close to the skin.

1 Pull the comb off the appliance (Fig. 8).

Never pull at the exible top of the comb. Always pull at the bottom

part.

ENGLISH 9

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips qc 5070 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips qc 5070 Manual

Product: