776047
11
Zoom out
Zoom in
Previous page
1/110
Next page
13
ENGLISH
Problem Possible cause Solution
Steam is reected from the ironing
board and condenses on the iron. Use a board/board cover that allows steam to
penetrate through.
Water droplets come
out of the soleplate. The steam that was still present
in the hose has cooled down and
condensed into water. This causes
water droplets to come out of the
soleplate.
Steam away from the garment for a few seconds.
Some steam comes out
of soleplate when iron
is resting.
The iron has rested for a longer
period of time and is regulating to
ensure that the soleplate is at the
right temperature during rest. This is
normal.
If the steam continues for a long period when
the iron is resting, switch o the appliance and
remove the plug from the wall socket. Contact an
authorised Philips service centre.
Steam and/or water
come out from under
the EASY DE-CALC
knob.
The EASY DE-CALC knob is not
tightened properly. Switch o the appliance and let the appliance
cool down for 2 hours. Unscrew the EASY DE-
CALC knob and screw it back onto the appliance
properly. Note: Some water may escape when you
remove the knob.
The rubber sealing ring of the EASY
DE-CALC knob is worn. Contact an authorised Philips service centre for a
new EASY DE-CALC knob.
Dirty water and
impurities come out
of the soleplate or the
soleplate is dirty.
Impurities or chemicals present in the
water have deposited in the steam
vents and/or on the soleplate.
Clean the soleplate with a damp cloth.
Too much scale and minerals have
accumulated inside the appliance. Descale the appliance regularly (see chapter
‘Important - EASY DE-CALC’ and ‘Important
-Descaling the soleplate’).
The iron leaves a shine
or an imprint on the
garment.
The surface to be ironed was uneven,
for instance because you were ironing
over a seam or a fold in the garment.
ActiveSense is safe on all ironable garments. The
shine or imprint is not permanent and will come
o if you wash the garment. Avoid ironing over
seams or folds or you can place a cotton cloth
over the area to be ironed to avoid imprints at
seams and folds.
The appliance does not
produce any steam. There is not enough water in the
water tank (the ‘low water alert’ light
ashes).
Fill the water tank (see chapter ‘Using your
appliance, section ‘Getting the product ready’).
The appliance is not hot enough to
produce steam. Wait until the ‘iron ready’ light on the iron lights
up continuously.
The automatic steam mode is o and
you did not press the steam trigger. Press the steam trigger and keep it pressed while
you iron or ensure that the automatic steam
mode is on.
The water tank is not placed in the
appliance properly. Slide the water tank back into the appliance rmly
(‘click’).
The appliance is not switched on. Insert the plug in the wall socket and press the
on/o button to switch on the appliance.
The Easy De-calc light is on. Descale the appliance (see chapter ‘IMPORTANT
- EASY DE-CALC’).
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips PSG9030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips PSG9030 in the language / languages: All languages as an attachment in your email.

The manual is 17.08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info