751539
19
Zoom out
Zoom in
Previous page
1/24
Next page
18 Philips · PicoPix Micro 2TV
Update SW through USB
CAUTION!
Do not turn off the projector or remove
the USB flash drive during the update.
1 Check the latest software version on
www.philips.com/support. Find your
product (model number: PPX360/INT),
and locate ‘Software and drivers’.
2 Download the zipped software file, then
unzip and save it in the root directory of the
USB flash drive.
3 Connect the USB flash drive (FAT32
formatted) to the projector.
4 Press to access the settings options
and go to Firmware Upgrade.
5 Follow the on-screen instructions to
complete the update.
Troubleshooting
Power cycling
If a problem occurs that cannot be corrected
with the instructions in this user manual, follow
the steps given here.
1 Turn the projector off by pressing .
2 Wait at least ten seconds.
3 Turn the projector on by pressing once.
4 If the problem persists, please contact our
technical service centre or your dealer.
Problems Solutions
The projector cannot be turned on. Disconnect and reconnect the power cable, and
try to turn the projector on again.
The projector cannot be turned off. Press and hold longer than ten seconds. If this
does not work, disconnect the power cable.
The remote control does not work. The remote control is not paired with the
projector. Pair the remote control with the
projector (see First time setup, page 8).
The remote control is not in Android TV mode for
Android TV menu navigation. Press on
the remote control to switch the remote control to
Android TV mode (if the remote control is paired
with the projector).
When the remote control is in Android TV mode,
the LED on the remote control flashes blue once
each time you press a button on the remote
control.
Check the batteries of the remote control.
No sound output to the connected digital
device.
Check the cables to the external device.
Check that the sound output is activated on the
projector. Press on the remote control
to access the settings options and go to Audio
Output - ARC/Optical.
No image from the external HDMI device. Check if the correct HDMI input is selected.
Disconnect the HDMI cable or switch off the
HDMI device.
Wait three seconds.
Reconnect the HDMI cable or switch on the HDMI
device again.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips PPX360 - PicoPix Micro 2TV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips PPX360 - PicoPix Micro 2TV in the language / languages: English as an attachment in your email.

The manual is 4,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips PPX360 - PicoPix Micro 2TV

Philips PPX360 - PicoPix Micro 2TV User Manual - German - 27 pages

Philips PPX360 - PicoPix Micro 2TV User Manual - Dutch - 26 pages

Philips PPX360 - PicoPix Micro 2TV User Manual - French - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info