811250
14
Zoom out
Zoom in
Previous page
1/18
Next page
14 Philips · PicoPix Micro+
Troubleshooting
Power cycling
If a problem occurs that cannot be corrected with the instructions in this user manual, follow the
steps given here.
1 Turn the projector off using .
2 Wait at least ten seconds.
3 Turn the projector on again using .
4 If the problem persists, please contact our technical service centre or your dealer.
Problems Solutions
The projector cannot be turned on. Disconnect and reconnect the power cable, and try to
turn the projector on again.
Low battery power. Connect the projector to an external
power supply.
The projection screen does not show images. You need to connect the projector to an HDMI device or
USB-C device, so that the projection screen can show
images (see Connect, page 6).
Check if the video output of the external device is
turned on.
The projector is charged slowly. When powered on, the external power will be used first
to run the projector and unused power will charge the
battery.
For faster charging, charge while the projector is
powered off.
The projector cannot be turned off. Press and hold longer than ten seconds. If this does
not work, disconnect the power cable.
No image from the external HDMI device. Disconnect the HDMI cable or switch off the HDMI
device.
Wait three seconds.
Reconnect the HDMI cable or switch on the HDMI
device again.
No sound from the external connected device. Check the cables to the external device.
Check that the sound is activated on the external
device.
Only the original cables from the device manufacturer
may function.
No sound from external HDMI output device. On the HDMI output device, set the audio setting to
Multichannel (Raw data) & Stereo (PCM).
No sound when you connect your computer via
HDMI cable.
Check that the sound is activated on the computer.
The projector turns itself off. Low battery power.
When the projector is running for a long period of time,
the surface becomes hot.
Check that the power cable is connected correctly.
The temperature of the projector’s surface is
warm.
For this projector it is normal to generate moderate heat
during operation.
What to do if the projector does not work when
connecting to a notebook PC?
Check that the HDMI cable is plugged in correctly.
Make sure that the notebook PC has been switched to
projector display.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips PPX325 PicoPix Micro plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips PPX325 PicoPix Micro plus in the language / languages: English as an attachment in your email.

The manual is 4.01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips PPX325 PicoPix Micro plus

Philips PPX325 PicoPix Micro plus User Manual - German - 23 pages

Philips PPX325 PicoPix Micro plus User Manual - Dutch - 20 pages

Philips PPX325 PicoPix Micro plus User Manual - French - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info