811244
21
Zoom out
Zoom in
Previous page
1/27
Next page
Troubleshooting 21
8 Troubleshooting
Power cycling
If a problem occurs and you cannot resolve it using the instructions in this user manual, try the
following steps to resolve the problem.
1 Turn the projector off by pressing twice.
2 Wait at least 10 seconds.
3 Turn the projector on by pressing .
4 If the problem persists, contact one of our customer service centres or your dealer.
Problem Solution
The projector cannot be turned on. Disconnect and reconnect the power cable, and
try to turn the projector on again.
The projector cannot be turned off. Press and hold longer than ten seconds. If this
does not work, disconnect the power cable.
No image from the external HDMI™ device. 1. Check if you have switched the input source to
HDMI1 or HDMI2.
2. Disconnect the HDMI™ cable or switch off the
HDMI™ device.
3. Wait three seconds.
4. Reconnect the HDMI™ cable or switch on the
HDMI™ device again.
No sound from the external connected
device.
Check the cables to the external device.
Check that the sound is activated on the external
device.
Only the original cables from the device
manufacturer may function.
No sound from external HDMI™ output
device.
On the HDMI™ output device, set the audio
setting to Multichannel (Raw data) & Stereo (PCM).
No sound when you connect your
computer using an HDMI™ cable.
Check that the sound is activated on the
computer.
Only the home menu appears and not the
image from the external device.
Check if the cables are connected to the correct
sockets.
Check that the external device is turned on.
Check if the video output of the external device is
turned on.
Only the home menu appears and not the
image from the connected computer.
Check that the HDMI™ output of the computer is
turned on.
Check if the resolution of the computer is set to
1920*1080.
The projector turns itself off. When the projector is running for a long period of
time, the surface becomes hot.
Check that the power cable is connected correctly.
The projector cannot read the USB storage
device.
The projector does not support the exFAT file
system.
Format the USB storage device in FAT32 or NTFS
format, then use it.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips NPX520 Neopix at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips NPX520 Neopix in the language / languages: English as an attachment in your email.

The manual is 5.86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips NPX520 Neopix

Philips NPX520 Neopix User Manual - German - 30 pages

Philips NPX520 Neopix User Manual - Dutch - 28 pages

Philips NPX520 Neopix User Manual - French - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info