811244
9
Zoom out
Zoom in
Previous page
1/27
Next page
Initial setup 9
Prepare the remote control
CAUTION!
The improper use of batteries can
lead to overheating, explosion, risk of
fire and injury. Leaking batteries can
possibly damage the remote control.
Never expose the remote control to
direct sunlight.
Avoid deforming, dismantling or
charging the batteries.
Avoid exposure to open fire and water.
Replace empty batteries immediately.
Remove the batteries from the remote
control if not in use for long periods of
time.
1 Open the battery compartment.
2 Insert the supplied batteries (type AAA)
with correct polarity (+/-) indicated.
3 Close the battery compartment.
When using a remote control with infrared
signals, point the remote control at the IR
sensor on the projector, and make sure
there is no obstacle between the remote
control and the IR sensor.
Power on and set up the
projector
Power on/off the projector
To turn on the projector, press on the
projector/remote control. The power LED
on the projector turns from red to white.
To turn off the projector, press and hold
on the projector/remote control for 2
seconds or press this button twice. The
projector enters standby mode and its
power LED turns from white to red.
To fully shut down the projector, disconnect
the power cable from the electrical socket.
Image focus adjustment
To adjust the image focus (sharpness), turn
the focus adjustment knob attached to the
projection lens.
Tip: If you change the projection distance later,
you'll need to adjust the image focus again.
Screen size adjustment
The projection screen size (or size of images) is
determined by the distance between the lens
of the projector and the projection surface.
This projector has a recommended projection
distance of 306 cm (120"), and thus creates a
maximum screen size of 100" (254 cm). The
minimum distance from the projection surface
is 120 cm (47.2").
Digital zooming
You can use the digital zooming function to
reduce the screen size.
1 Access the projector's settings menu by
pressing on the remote control or
on the projector. Then select Projector >
Digital Zoom.
2 Press / to adjust the screen size. You
can scale down the screen to up to 50% of
its full size.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips NPX520 Neopix at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips NPX520 Neopix in the language / languages: English as an attachment in your email.

The manual is 5.86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips NPX520 Neopix

Philips NPX520 Neopix User Manual - German - 30 pages

Philips NPX520 Neopix User Manual - Dutch - 28 pages

Philips NPX520 Neopix User Manual - French - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info