664863
8
Zoom out
Zoom in
Previous page
1/10
Next page
Frequently asked questions
No signal bar is displayed on the screen.
The handset is out of range. Move it closer
to the base station.
If the handset displays [Unregistered],
register your handset. (See the section on
“Register additional handsets”).
If I fail to pair (register) the additional
handsets to the base station, what do I do?
Your base memory is full. Access
>
[Services] > [Unregister] to unregister the
unused handsets and try again.
If registration fails, unplug the power
adapter from the base station and plug it
back. Wait for 15 seconds, and then repeat
the registration procedure.
My handset is in searching or unavailable
status, what do I do?
Make sure that the base station has power
supply.
Move the handset closer to the base
station.
Register the handset to the base station.
I have chosen a wrong language which I
cannot read, what do I do?
1 Press
to go back to the standby screen.
2 Press to access the main menu screen.
3 The following options will appear on the
screen:
[Phone setup] > [Language]
[Réglages] > [Langue]
[Telefon-Setup] > [Sprache]
[Cong. telef.] > [Lingua]
4 Select them to access the language
options.
5 Select your own language.
I have chosen a wrong country in Welcome
screen, what do I do?
Reset your phone settings to the original
factory settings (see the section on “Restore
default settings”).
I cannot change the settings of my voice
mail, what do I do?
The voice mail service is managed by your
service provider but not the phone itself.
Contact your service provider to change the
settings.
The handset on the charger does not charge
or the battery discharges too fast.
Make sure the batteries are inserted correctly.
Make sure the handset is placed properly on
the charger. If the docking tone is turned on,
you can hear the docking tone when you
place the handset on the charging cradle.
The charging contacts are dirty.
Disconnect the power supply rst and
clean the contacts with a damp cloth.
The battery is not fully recharged. Leave
the handset on the charging cradle for at
least 8 hours or until the battery icon on
the handset stops scrolling and indicates
full bar.
The batteries are old or defective. Purchase
and replace with new rechargeable
batteries with the same specications.
Bad audio (crackles, echo, etc.)
The handset is nearly out of range. Move it
closer to the base station.
The phone receives interference from the
nearby electrical appliances. Move the
base station away from them.
The phone is at a location with thick walls.
Move the base away from them.
The phone receives interference from the
DSL (digital subscriber line) connection.
Install a DSL lter to prevent the noise.
Contact your service provider for the DSL
lter.
The caller ID does not display.
The service is not activated. Check with
your service provider.
The caller’s information is withheld or
unavailable.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips Mira M560 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips Mira M560 in the language / languages: English as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips Mira M560

Philips Mira M560 User Manual - English - 42 pages

Philips Mira M560 Quick start guide - Dutch - 10 pages

Philips Mira M560 User Manual - Dutch - 48 pages

Philips Mira M560 Quick start guide - French - 10 pages

Philips Mira M560 User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info