24
Advanced settings
Advanced
settings
Settings list
You may print a list of your MF-JET’s parameter
settings to monitor any changes made to the de-
fault parameters!
Press M, 54 and OK.
Fax settings
Reception mode
If you want to receive fax messages with a
modem (with a PC) connected on the same
telephone line as the MF-JET, you must disable
automatic fax reception.
Press M, 241 and OK. Use / to choose
MANUAL (to disable automatic reception) or FAX
(to receive faxes on the MF-JET automatically).
Number of copies
You may print incoming documents more than
once.
Press M, 242 and OK. Enter a number (1 to
99) and press OK.
Sorted printing
When you receive documents of several pages,
they will be received in the memory and then
printed out in the correct order. You can avoid
this by de-activating sorted printing:
Press M, 243 and OK. Use / to choose
WITH or WITHOUT and press OK.
Sorted sending
Documents of several pages are scanned into
the memory and then sent. You can disable this
function.
Press M, 232 and OK. Use / to choose
WITH or WITHOUT and press OK.
SMS settings
When you select your country when setting up
the MF-JET, the parameters for SMS emission
and reception will be pre-set. If these settings do
not work or if you want to use another provider,
you will need to change these settings. Your SMS
service provider will provide the numbers you
need.
SMS emission
1 Press M, 4611 and OK.
2 Enter the provider number your machine has
to dial to send SMS messages. Press OK.
SMS reception
1 Press M, 4612 and OK.
2 Enter the provider number to receive SMS
messages. Press OK.
SMS alternative reception
You might wish to receive SMS from a second
provider. In that case you will have to enter a sec-
ond telephone number to receive SMS messages.
1 Press M, 4621 and OK.
2 Enter the second telephone number for SMS
reception and press OK.
Automatic printing
Press M, 451 and OK. Use / to choose
whether SMS messages should be printed out
automatically or not and press OK.
Beep
Press M, 452, OK. Use / to choose
whether the MF-JET should emit a beep to no-
tify you when an SMS message is received and
press OK.
Sender name
Press M, 453 and OK. Use / to choose
whether SMS messages that you send should in-
clude your name. Confi rm with OK.