18982
37
Zoom out
Zoom in
Previous page
1/44
Next page
English
37
Radio Reception
Tuning to radio stations
1 Press STANDBY-ON B (B on the remote)
to switch on the last selected source.
2 Press SOURCE (TUNER on the remote) to
select TUNER mode.
3 Press TUNER on the remote again to select
the desired band: FM or MW.
4 Press and hold ¡ / (à / á on the remote)
until the frequency indication starts to change,
then release.
The system automatically tunes to the next
strong radio station.
To tune to a weak station, press ¡ / (à / á
on the remote) briefly and repeatedly until an
optimal reception is found.
5 Repeat Step 4 if necessary until you find the
desired radio station.
Presetting radio stations
You can preset up to 40 stations (20 in each
band) regardless of the reception.
Automatic progamming
Press PROG on the remote for more than two
seconds to activate programming.
All available stations are programmed.
Manual progamming
1 Tune to your desired radio station (refer to
“Tuning to radio stations”).
2 Press PROG on the remote.
PROG icon flashes.
3 Press PRESET+/- (or ¡ / on the remote) to
select the desired preset number.
If “PROGicon goes off before you select the
desired preset number, press PROG on the
remote.
4 Press PROG on the remote again to store the
radio station.
Repeat steps 1-4 to store other radio stations.
Other Functions
Listening to preset radio stations
In tuner mode, press PRESET+/- (or ¡ / on
the remote) to select the desired preset number.
The preset number, radio frequency, and
waveband are displayed.
RDS
Radio Data System is a service that allows
FM stations to show additional information. If
you are receiving a RDS station, and the
station name are displayed.
When automatic programming is used, RDS
stations will be programmed first.
Scrolling through different RDS
information
Press RDS/CLOCK briefly and repeatedly to
scroll through the following information (if
available):
Station name
Radio text messages
Frequency
Setting the RDS clock
Some RDS radio station may be transmitting a
real clock time at an interval of every minute. It
is possible to set the clock by using a time signal
which is broadcast together with the RDS signal.
1 Tuned to an RDS station from FM band (refer to
“Tuning to radio stations”).
2 Press and hold RDS/CLOCK for more than
two seconds.
3 Press RDS/CLOCK again.
"SEARCH TM" is displayed.
When RDS time is read, “RDS” and RDS time
time value are displayed and the current time
will be stored.
Note:
Some RDS radio station may be transmitting a
real time clock at a minute interval. The accuracy
of the transmitted time depends on the
transmitting RDS radio station.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips MCD908 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips MCD908 in the language / languages: English as an attachment in your email.

The manual is 2,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips MCD908

Philips MCD908 User Manual - German - 44 pages

Philips MCD908 User Manual - Dutch - 44 pages

Philips MCD908 User Manual - Danish - 44 pages

Philips MCD908 User Manual - French - 44 pages

Philips MCD908 User Manual - Italian - 44 pages

Philips MCD908 User Manual - Polish - 44 pages

Philips MCD908 User Manual - Portuguese - 44 pages

Philips MCD908 User Manual - Swedish - 44 pages

Philips MCD908 User Manual - Spanish - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info