445567
26
Zoom out
Zoom in
Previous page
1/36
Next page
26 Philips PPF 631 · 632 · 675
EN
11 Telephone Lines and Additional Devices
Configuring Telephone Lines and
Services
PABX Systems
PABX Systems
Private branch exchanges (PABX) are typical in many of-
fices and some households. You must dial an outside line
access code in order to get a connection to the public tele-
phone network (PSTN) from a PABX.
External Dev ice Not Extension
1 Press OK, 96 and OK.
2 In some countries you can set the dialling process to
pulse dialling or tone dialling (DTMF tones). Use [
to select the desired dialling process.
3 Confirm with OK.
4 Use [ to set whether you operate your device on an
extension.
5 Confirm with OK.
6 Configuring an extension: Enter the outside line
access code with which you reach the public telephone
network. This is usually 0.
7 Confirm with OK.
8 When finished, the device tests the telephone line.
Confirm with OK.
9 Your device checks whether it can establish a connec-
tion with the public telephone network. If it cannot es-
tablish the connection, you are once again asked for in-
put.
DSL Connection
In the event that you use a DSL modem: Connect the ma-
chine after the modem. For additional information, please
consult the operating manual of your DSL system.
ISDN Connection
ISDN Connecti on
Your device is an analogue fax device (Group 3). It is not
an ISDN device (Group 4), and therefore it cannot be op-
erated directly on an ISDN connection. In order to do this,
you need either an analogue adapter or a connection for
analogue terminals. Details for ISDN connections can be
found in the instructions provided with the terminal
adapter or the dial-up router.
Voice-Mailbox
You cannot simultaneously use the answering machine facil-
ity of your telephone service provider (= voice-mail box) and
receive faxes on your devices. Get the mail-box function for
your telephone connection deactivated or set the number of
rings for the fax switch to lower than
5
on your device (also
see Chapter Setting the Fax Switch,
Page 24
). When the fax
switch accepts the call, the mail-box of the service provider
does not step in. Enquire with your telephone company.
Connecting Additional Devices
Additional Devices
You can operate additional devices on a telephone line,
such as cordless telephones, answering machines, modems
or charge counters.
Additional Telephone and SMS
Connection to the Machine
Connection to the device
You can connect additional devices directly to your device.
Insert the telephone cable of the additional device into the
EXT- socket (RJ-11-connection) on the device.
Connecting Addi tional Devices
Connecting in Serial
Connection to the Telephone Line
Order of Connections
In order for the fax switch to function, the machine must
be first in the series if multiple devices are connected to the
same telephone socket. Follow the correct order.
Multiple Telephone Sockets
Using Additional Telephones (Ea-
sylink)
Easylink
With the Easylink function you can control your device
with additional telephones. To use this function, addition-
al telephones must be set to the tone dialling mode (DT-
MF/MFV tones) (for this purpose see the operating man-
ual of your additional telephone).
An additional telephone connected to the machine
on a telephone socket is not considered an extension.
Only use pulse dialling if tone dialling is not yet
activated for your telephone line.
In rare cases, the outside line access code may be
a different number or a two-digit number. For
older telephone systems, the outside line access
code can be R (= Flash). Press R to enter this out-
side line access code. If the connection to the pub-
lic telephone network is not possible, contact
your telephone system supplier.
If you are using a cordless telephone with SMS func-
tion on the same line, then the specific device at
which you will receive an SMS message will depend
on the specific manufacturer. Only one of the devices
will receive the SMS message. Try to turn off the
SMS reception on your cordless telephone.
We recommend direct connection to the device be-
cause this allows the fax switch to function optimally
and to control the additional devices.
If you have multiple telephone sockets for the same
telephone line, the machine must be connected to
the first telephone socket.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips MAGIC 5 ECO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips MAGIC 5 ECO in the language / languages: English as an attachment in your email.

The manual is 6,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips MAGIC 5 ECO

Philips MAGIC 5 ECO User Manual - German - 32 pages

Philips MAGIC 5 ECO User Manual - Dutch - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info