423986
23
Zoom out
Zoom in
Previous page
1/52
Next page
23
Deleting Heard Messages
Deleting New Messages
1 Press b.
2 Use [ to select
MESSAGES.
3 Confirm with OK.
4 Use [ to select
MESSAGE: DELETE.
5 Confirm with OK. The heard messages are deleted.
On the cordless telephone
Deleting single message
During the playback, press
0
to delete the current message.
Deleting messages already played
Deleting New Messages
1 Press [, and using [ select VOICE MAIL.
2 Confirm using OK.
3 Using [ select
MESSAGES.
4 Confirm with OK.
5 Using [ select
DELETE OLD.
6 Confirm with OK.
7 Confirm the deletion with ô
Yes. Using õ No you
can cancel the function.
Setting up forwarding and remote
access
Available only on the device
Entering the Access Code
Access Code
In order that you can receive forwarded messages as well as
check or control the answering machine from other tele-
phones, you must enter an access code.
Access Code <> VIP Code
1 Press b.
2 Use [ to select
ACCESS CODE.
3 Confirm with OK.
4 Enter a four-digit code.
5 Confirm with OK.
Forwarding Messages
Forwarding Messages
The machine forwards messages to a specified telephone
number. Once the configured number of messages is
reached, the machine calls the number. If the call is an-
swered, a greeting text is played. Then the person on the line
must enter the access code. If no code is entered or an incor-
rect code is entered three times, the machine hangs up.
1 Press b.
2 Use [ to select
FORWARDING.
3 Confirm with OK.
4 Use [ to select whether you would like to switch for-
warding on or off.
5 Confirm with OK.
6 Enter the number to which the received messages
should be forwarded.
7 Confirm with OK.
8 Use [ to select how many messages should be collect-
ed and forwarded together.
9 Confirm with OK.
10 Recording a new greeting text: Press OK to
record the greeting text. Wait until hearing the confir-
mation tone before starting the text.
11
Press
OK
to end the recording. The recording is played back.
Using the Remote Control
Remote Control
With a telephone call, you can listen to and delete messag-
es, record a new outgoing message or switch the answering
machine on or off.
Tone Dialling
1 Call your telephone number.
2 Wait until the answering machine switches on and
plays back the outgoing message.
3 Enter the access code.
4 The machine interrupts the outgoing message and plays
new messages. If no new messages have been received,
you will hear two confirmation tones.
5
The functions below are available via the number buttons.
6 Hang up to end the remote control session.
Messages not yet heard must be heard first before de-
leting them.
You can also load the function by pressing OK,
72 and OK.
You can also delete the already heard messages by
pressing C and OK in the starting mode.
Messages not yet heard must be heard first before de-
leting them.
These functions are available only on the device.
The access code may not be identical to the VIP code.
You can also load the function by pressing OK,
79 and OK.
You can also load the function by pressing OK,
77 and OK.
When you record a message, you are asked, if you
would like to use the old message or would like to
record a new one. Confirm using OK.
The telephone on this connection must be set to tone
dialling. Press a button within 50 seconds, otherwise the
connection is cut-off (country and network dependent).
If you select the 5/2 option for the number of
rings of the answering machine, the answering
machine switches on after two rings, when you
have received new messages. If there are no new
messages, the device rings five times. If the device
does not pick up after two rings, you have no new
messages. You can terminate the remote access
without incurring any telephone costs.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips magic 5 color dect at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips magic 5 color dect in the language / languages: English as an attachment in your email.

The manual is 8,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips magic 5 color dect

Philips magic 5 color dect User Manual - German - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info