424082
33
Zoom out
Zoom in
Previous page
1/40
Next page
33
Appendix
Problems when faxing or printing
Faxes are of poor quality.
Change the resolution setting to F or f.
Check the document or set a higher contrast with
function 47 (see chapter Fax & Copy / Con-
trast).
Test the fax machine by making a copy. If your
copy is faultless the correspondent’s fax machine
might be defective.
Call service if necessary.
Your fax or your recipient’s fax machine produces
black lines when printing.
Clean the scanner with a cloth (see Care and main-
tenance).
Test the fax machine by making a copy. If your
copy is faultless the correspondent’s fax machine
might be defective.
Call service if necessary.
Copy is blank.. Load the document with the printed side up.
Call service if necessary.
Problems with the connection
Your fax machine rings once, then there is a mo-
ment of silence and another ring signal after that.
This is entirely normal. After the fi rst ring signal
the fax machine takes over the call. When the fax
machine has recognised that the incoming call is
a telephone correspondence, the fax machine will
continue to ring.
NO CONNECTION
or REDIAL FAILED
Try later or draw your fax partner’s attention to a
possible installation fault.
NO LOOP CURRENT
Check the installation of your fax machine.
When you lift the receiver of your fax machine
you do not hear the dial tone. The display shows:
NO DIALTONE
Connect your telephone cable to the socket on
the bottom of your fax machine identifi ed with
LINE.
BUSY
or
fax transmissions are constantly interrupted.
Try to send the fax manually: Press l/DIAL
and dial the fax number. If the recipient is us-
ing an automatic answering device, wait until you
hear a tone after the pre-recorded message. Press
START.
You cannot receive any faxes. Set the number of ringing signals for the answer-
ing machine or the total number of ringing signals
with function 31 or 32 to lower than fi ve.
On lifting the handset you hear a tone or silence. You are receiving a fax. At the fax machine: Press
START . At an additional telephone: press *
and 5. Replace the handset.
EXTERNAL PHONE
The red lamp fl ashes v.
This is not a fault. You are now using an additional
telephone.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips magic 3 voice dect sms at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips magic 3 voice dect sms in the language / languages: English as an attachment in your email.

The manual is 11,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips magic 3 voice dect sms

Philips magic 3 voice dect sms User Manual - German - 48 pages

Philips magic 3 voice dect sms User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info