521758
30
Zoom out
Zoom in
Previous page
1/40
Next page
30
Hints and Tips
4 Carefully remove the document either from
the front or the back.
5 Close the scanner cover on the left and right,
making sure it clicks into place.
6 Close the panel so that it also clicks into
place.
7 Insert paper (see Installation / Loading pa-
per).
Easylink
Easylink is used in conjunction with additional
devices connected to the same telephone line
(e.g. cordless phones). However, the additional
phone must be set to dual-tone multi-frequency
method. If your telephone connection requires
the pulse dialling method, then you would need
to briefl y reset your additional device to use it.
For more information about this, please see the
user manual for your device.
Starting fax reception
When you answer a call on the fax machine and
recognise that it is a fax (you hear a beep or no
sound), press START and hang up. The fax will
be received.
When you answer using an additional phone and
it turns out to be a fax, you can start the fax re-
ception by pressing *5 and then hang up. The
fax machine will receive the fax.
Interrupt ringing
When you answer on an additional phone and the
fax machine continues to ring, this means that the
extension phone is connected in parallel. You can
interrupt the ringing of the fax machine by press-
ing **.
Changing codes
Select function 34 by pressing MENU, 34,
and then OK. Enter two different codes and
confi rm each code with OK. Each code should
begin with * or #.
Please note that the three Easylink codes must
be different. Otherwise on the display appears:
CODE not OK
v Only change the specifi ed codes *5 and
** if absolutely necessary!!
Service code
Function 45 (Service code) is used to delete some
or all of your changes to the factory settings. This
function enables you to partially or fully reconfi g-
ure your device. It is especially helpful if you have
modifi ed settings but fi nd that your fax machine
does not respond as expected.
v Only use this function when absolutely
necessary!
If you are satisfi ed with your changes to the fac-
tory settings you should not use this function.
After deleting some or all of your custom settings
please rerun Easy Install.
The following codes are at your disposal:
Code No. 7117
This code erases all your modifi cations to the fac-
tory settings. The fax machine will therefore react
in exactly the same way as on fi rst installation.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips Magic 3 serie at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips Magic 3 serie in the language / languages: English as an attachment in your email.

The manual is 11,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips Magic 3 serie

Philips Magic 3 serie User Manual - German - 44 pages

Philips Magic 3 serie User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info